*mydirectindustry

APF-LVD test report

Product catalog summary

Overview: This document is a Low Voltage Directive (LVD) test report for the Active Power Filter, model APF-150A, conducted by Shenzhen BCT Technology Co., Ltd. It confirms compliance with EN 61439-1:2011 and EN 61439-2:2011 standards, focusing on low-voltage switchgear and controlgear assemblies.

Test Specifications: Tests were conducted from June 8 to June 17, 2020, with the report issued on June 20, 2023, at CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd.

Equipment Details: The Active Power Filter is for indoor use, rated at AC400V, 50Hz, and 150A. Other models include APF-30A, APF-50A, APF-75A, APF-100A, and APF-200A.

Compliance and Results: The equipment complies with the standards, with all tests resulting in a 'Pass'. Key parameters include a rated operational voltage of 380V, insulation voltage of 2820V, and impulse withstand voltage of 5000Vac.

Construction and Installation: The device is stationary, wall-mounted, designed for skilled personnel, with a protection rating of IP20 and compliant with pollution degree 2 standards.

Environmental Conditions: Suitable for temperatures between -10°C and 40°C, with a maximum relative humidity of 95% without condensation, and designed for altitudes up to 1000m.

Documentation and Marking: Includes instructions for handling, installation, operation, and maintenance, ensuring EMC compliance. Marked with the manufacturer's name, model number, and IEC 61439-2 compliance.

Conclusion: The Active Power Filter meets all safety and performance standards as per EN 61439-1:2011 and EN 61439-2:2011, suitable for industrial applications.

Protection Against Corrosion: Ensured through suitable materials or coatings, verified by specific tests.

Properties of Insulating Materials: Must demonstrate thermal stability and resistance to heat and fire, verified by standards and tests like the glow-wire test.

Mechanical Strength: Enclosures must withstand service stresses and short-circuit conditions, verified by testing.

Degree of Protection: Verified according to IEC standards, indicated by the IP code.

Clearances and Creepage Distances: Based on IEC principles to ensure insulation coordination, maintained during service conditions.

Protection Against Electric Shock: Assemblies must facilitate safe operation and maintenance, preventing direct contact with hazardous parts.

Fault Protection: Includes protective measures for installations designed according to IEC standards, preventing shock through contact with conductive parts.

Limitation of Steady-State Touch Current and Charge: Warning plates required for equipment with steady-state touch current.

Operating and Servicing Conditions: Protection against live parts must be maintained during operation or component replacement.

Specifications: Assemblies must allow operations under voltage, maintenance on isolated units, and future extensions safely.

Safety and Accessibility: Obstacles must prevent unintentional contact with live parts, and gangways must comply with IEC 61140.

Switching Devices and Components: Must comply with IEC standards, suitable for application, and safely isolated or connected while circuits are live.

Installation and Identification: Devices should avoid interference, and conductors must be identified by arrangement, color, or symbols.

Performance Requirements: Assemblies must withstand overvoltages, verified by power-frequency and impulse withstand voltage tests.

Temperature Rise: Temperature rise limits must not be exceeded, ensuring safe operation.

Short-Circuit Protection: Assemblies must withstand short-circuit currents, with coordination of protective devices.

Electromagnetic Compatibility (EMC): Performance requirements outlined in Annex J.

Design Verification: Ensures compliance through testing on a representative assembly sample.

Protection Against Electric Shock: Verified for internal and external faults, ensuring safety.

Dielectric Properties: Assemblies undergo tests to ensure dielectric strength.

Verification of Temperature Rise: Ensures temperature-rise limits are not exceeded.

Short-Circuit Withstand Strength: Verified through design rules, calculations, or tests.

Electromagnetic Compatibility (EMC): Verification required.

Mechanical Operation: Tests not required for type-tested devices unless impaired by mounting.

Routine Verification: Detects material and workmanship faults, ensuring proper functioning.

Degree of Protection of Enclosures: Visual inspection confirms protection measures.

Clearances and Creepage Distances: Visual inspection ensures compliance.

Protection Against Electric Shock: Visual inspection verifies protective measures.

Incorporation of Built-in Components: Installation must follow manufacturing instructions.

Internal Electrical Circuits and Connections: Connections checked for tightness.

Terminals for External Conductors: Must comply with manufacturing instructions.

Mechanical Operation: Verification includes checking interlocking arrangements.

Dielectric Properties: Power-frequency withstand test required for all circuits.

Wiring, Operational Performance, and Function: Verification ensures information and markings are complete.

Catalog excerpts

LVD TEST REPORT For Shenzhen Consnant Technology Co., Ltd. Building B6, Junfeng Industrial Park, Yonghe Road, Fuhai Sub-District, Bao'an District, Shenzhen City, 518103 PR.China. Test Model: APF-150A Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior written consent of Shenzhen BCT Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval of Shenzhen BCT Technology Co., Ltd. Tel: 86-755-2947 5656 Fax: 86-755-2947 5655 http://www.bct-test.com

Open the catalog to page 1

TEST REPORT EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and Sub-District, Bao'an District, Shenzhen City, 518103 P.R.China. Name of Testing Laboratory Shenzhen BCT Technology Co., Ltd. Nanshan District, Shenzhen, GuangDong, China This report shall not be reproduced except in full, without the written approval of Shenzhen BCT Technology Co., Ltd. Tel: 86-755-2947 5656 Fax: 86-755-2947 5655 http://www.bct-test.com

Open the catalog to page 2

BCT-TEST Copy of marking plate: The artwork below may be only a draft. Remark: The height dimension of CE mark should not less than 5mm, the height dimension of WEEE symbol should not less than 7mm. Summary of testing: The test object has been assessed for safety with respect to the above test specifications and found to comply with the requirements of EN 61439-1:2011; EN61439-2:2011. General remarks: This report shall not be reproduced except in full without prior approval of the company. The test results presented in this report relate only to the item(s) tested. "(see remark #)” refers to...

Open the catalog to page 3