GC-4602-2 Channel Analog Output Module（-5V~+5V）
1 / 12Pages

GC-4602 2-channel analog output module（-5V~+5V） User manual

Vhandy Technology

Vhandy Technology 1. Functional introduction 1.1 Functional Overview GC-4602 (2-channel analog output module,-5V~+5V) can be used to output signals within the range of-5V~+5V. The terminal module can provide an electrical isolation signal with a resolution of 16 bits for the processing layer. The GC-4602 module has two two-wire outputs, which are particularly suitable for installation in the control cabinet to save space. The GC-4602 module has a common ground potential and the power contacts are connected together. The reference ground of the output is 0V power contact. 1.2 Performance...

Vhandy Technology 2. Installation and use of equipment This chapter will explain in detail the installation method of the GC-4602 module, the wiring method, the meaning of the indicator light and the meaning of the interface. 2.1 Module fixed The installation method of GC-4602 module is shown in Figure 2.1. You need to use a flat-blade screwdriver to assist in installation. Figure 2.1 GC-4602 Module installation First you need to install the fieldbus coupler on the rail, then attach the GC4602 module to the right of the fieldbus coupler or other module to add the component. Insert the...

Vhandy Technology locked in the circular hole. Figure 2.2 GC-4602 Module installation Figure 2.3 GC-4602 Module terminal strip The wiring terminal block of GC-4602 module is shown in Figure 2.3. GC4602 contains 2 groups of output points, and can connect to 2 groups of analog signals at most. The serial numbers corresponding to each terminal and their meanings are shown in Table 2.1.

Vhandy Technology 1 Group 1 signal voltage output. 2 Group 1 signal reference ground. 3 Group 2 signal voltage output. 4 Group 2 signal reference ground Table2.1 GC-4602 Module indicator 2.3 System status indicator The GC-4602 module has four running lights to indicate the operating status of the device. The specific indication function of the indicator is shown in Table 2.2. When the LED is on, the status of the GC-4602 module is shown in Table 2.3. Indicator light Color Indicating status RUN Green Operation instruction Table 2.2 GC-4602 Module indicator When the output signal of the...

Vhandy Technology stands for the address of variable access and the additional attributes of the variable (see page 46 of the e-book for details). (Note: Input only affects input, output only affects output, output and input do not affect each other. That is, if there is and only an input module in front of the output module, then no matter how many input modules are in front, the address of the first output module is still Q0 .0.) 2.5 Combination with GCAN-IO-8000 series equipment The status of the analog output is represented by two bytes. For example: GCAN-IO-8000 module node number is...

Vhandy Technology 3. Technical specification Interface characteristics Output quantity Two Signal voltage -5V~+5V ＞5kΩ(short circuit protection) Load Power supply By GC-bus Resolution 16 bit Conversion time ~4 ms ＜±0.1% (full range) Measurement error ESD rating 7 kV Electrical isolation 1500 Vrms GC-bus current 150mA consumes Bit width outputin 2 x2 bytes the process image No address setting, configured through bus couplers or Configuration controllers. Suitable for all GCAN-PLC-400 series, GCAN-8000 Pluggable wiring series bus terminal modules. Environment test Working temperature...

Vhandy Technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy Technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Vhandy Technology Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy Technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com