GC-3644 4-channel analog input module(0-20mA) User manual

Vhandy technology Revision History Modify device parameters

Vhandy technology

Vhandy technology 1. Introduction 1.1 Overview The GC-3644 module has integrated 4 analog input 0-20mA channels, which acquires analog signals in real time and transmits them to the GCANPLC coupler. This module can be used with any other GC Series IO module to capture and process analog data in industrial automation or distributed control systems. 1.2 Properties at a glance ● 4 input channels ● Acquisition Current range:0-20mA ● Internal resistance: 100kΩ ● Resolution: 16bits ● Conversion time:<300ms ● Electric isolation:500Vrms ● Power Supply by GCAN-PLC-400 orGCAN-IO-8000 ● Current consumption:130mA...

Vhandy technology 2. Installation and use This chapter will describe the installation method, wiring method, meaning of the indicator and meaning of the interface of the GC-3644 module. 2.2 Module fixing The installation method of GC-3644 module as shown in Figure 2.1 and a flat-blade screwdriver is needed for auxiliary installation. Figure 2.1 Installation of GC-3644 module First the user need to install the GCAN-PLC on the guide rail and plug the GC-3644 along GCAN-PLC's right side until the lock is stuck. The GC-3644 module needs to be used with a GCAN-PLC-400 or GCAN8000/8100 series coupler,...

Vhandy technology Figure 2.2 Wiring method of GC-3644 module Figure 2.3 GC-3644 module terminal definition

Vhandy technology 1 NO.1 signal input + 2 NO.1 signal input3 NO.2 signal input+ 4 NO.2 signal input5 NO.3 signal input+ 6 NO.3 signal input+ 7 NO.4 signal input+ 8 NO.4 signal input+ Table 2.1 GC-3644 module indicator 2.4 System status indicator The GC-3644 module has 4 run indicators that indicate the operating status of the device. The specific indication function of the indicator light is shown in Table 2.2. When the indicator is lit, the status of the GC-3644 module is shown in Table 2.3. Indicator Indication status RUN Green Operating Table 2.2 Indicator of GC-3644 module When the input...

Vhandy technology necessary to define the variable type, input signal position, start character, separator, etc. For example: "AI0 AT%I0.0:INT;", where "0.0" represents the starting address of the first channel, each channel occupies 2 bytes, 0-20mA corresponds to 0~65535, so the second The starting address of each channel is I2.0. When the user uses more than one GC-3644 module, the second GC-3644 needs to be defined from "I8.0", because each 3644 has 4 channels; "%" (percent sign) is the direct variable start symbol : ":" (semicolon) is a variable or type separator. Use the symbol variable...

Vhandy technology 3. Technical Specifications Interface characteristics Number of inputs Acquisition current range Resolution Conversion time Measuring error Electrical isolation Bit width in the process image Installation position Power supply 4 0-20mA 16 bite <300ms < ±0.3% 500 V(GC-bus/ Signal voltage) 4*2 input bytes In sequential order Powered by GCAN-PLC-400 or GCAN-IO-8000, current consumption 100mA Environmental testing Operating temperature Permissible relative humidity EMC test Vibration/shock resistance EMC resistance burst/ESD Protection class -40℃~+85℃ 95%RH，no condensation EN 55024:2011-09...

Vhandy technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the product....

Vhandy technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Vhandy technology Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: [email protected] Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com