GC-2204 4-channel relay output module User manual

Vhandy technology Revision History Modify device parameters Adjust document structure Modify product picture

Vhandy technology

Vhandy technology 1. Introduction 1.1 Overview The GC-2204 IO module has integrated 4 relay output channels, which can control the switching on and off of the relay according to instructions sent by the GCAN-PLC-400/510, GCAN-IO-8000/8100 series controllers. 1.2 Properties at a glance ● 4 relay output channels ● Rated load 1: 0.1A 230VAC ● Rated load 2: 1A 30VDC ● Electrical isolation: 500 V(GC-bus) ● Current consumption:180mA ● No address setting, configuration via bus coupler or controller ● Suitable for all GCAN-IO-8000 series bus terminal modules ● Operating temperature: -40°C ~+85°C ● Size:...

Vhandy technology 2. Installation and use This chapter will describe the installation method, wiring method, meaning of the indicator and meaning of the interface of the GC-2204 module. 2.1 Module fixing The installation method of GC-2204 module as shown in Figure 2.1 and a flat-blade screwdriver is needed for auxiliary installation. Figure 2.1 Installation of GC-2204 module First the user need to install the GCAN-PLC on the guide rail and plug the GC-2204 along GCAN-PLC's right side until the lock is stuck. When remove the GC-2204, the user need to release the self-locking mechanism by pulling...

Vhandy technology Figure 2.2 Wiring method of GC-2204 module Figure 2.3 GC-2204 module terminal definition

Vhandy technology Definition Relay output 1 Relay output 2 Relay output 3 Table 2.1 GC-2204 module indicator 2.3 System status indicator The GC-2204 module is equipped with 4 running indicator lights, which are used to indicate the running state of the equipment.The specific indication function of the indicator light is shown in Table 2.2. When the indicator light is on, the status of the GC-2204 module is shown in Table 2.3 Indicator RUN green Operation instructions Table 2.2 Indicators of GC-2204 Module When the output signal of the GC-2204 module is activated, the running indicator will light...

Vhandy technology "0.0" represents the position of the output point, and "0.0"~"0.3" respectively define the 1-4 output points in the first GC-2204 module. When the user uses more thanone gc-2204 module, the second gc-2204 shall be defined from "1.0" to "1.3", and so on. "%" (percent sign) is the direct variable starter; ":" (colon) is the variable or type separator. The Boolean is read from the %I0.0 address using the symbol variable DI0. AT represents the address of the variable access and the additional attribute of the variable. 2.5 Combined with GCAN- 8000series The state of the digital...

Vhandy technology 3. Technical Specifications Interface characteristics Number of outputs 4 Related load 1 0.1A 230V AC Related load 2 1A 30V DC Electrical isolation 500 V (GC-bus/Signal voltage) Bit width in the Output 1 byte process image Installation position In sequential order Power supply Powered by GCAN-PLC, current consumption 180mA Environmental testing Operating -40℃~+85℃ temperature Permissible relative 95%RH，no condensation humidity EN 55024:2011-09 EMC test EN 55022:2011-12 Vibration/shock EN 60068-2-6/EN 60068-2-27/29 resistance EMC resistance EN 61000-6-2 /EN 61000-6-4 burst/ESD...

Vhandy technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the product....

Vhandy technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Vhandy technology Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: [email protected] Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com