GC-2018-8DO(NPN)
13Pages

GC-2018 8-channel digital output module (NPN) User manual

Vhandy technology Revision History Modify device parameters Modify device appearance picture

Vhandy technology

Vhandy technology 1. Introduction 1.1 Overview The GC-2018 module has integrated 8 digital output channels, which acquires digital signals in real-time and transmits them to the GCAN-PLC coupler. This module can be used with any other GC Series IO module to capture and process digital data in industrial automation or distributed control systems. 1.2 Properties at a glance ● 8 output channels ● Nominal voltage: 24V DC(±20%) ● Load types are resistive load, inductive load, lamp load; ● Maximum output current:500mA ● Electrical isolation: 500 V(GC-bus) ● Current consumption:120mA ● The bit...

Vhandy technology 2. Installation This chapter will describe the installation method, wiring method, meaning of the indicator and meaning of the interface of the GC-2018 module. 2.1 Module fixing The installation method of GC-2018 module as shown in Figure 2.1 and a flat-blade screwdriver is needed for auxiliary installation. Figure 2.1 Installation of GC-2018 module First install the GCAN-PLC on the guide rail and plug the GC-2018 along GCAN-PLC's right side until the lock is stuck. When remove the GC-2018, the user need to release the self-locking mechanism by pulling out the orange...

Vhandy technology Figure 2.2 Wiring method of GC-2018 module Figure 2.3 GC-2018 module terminal definition

Vhandy technology Digital output 1 Digital output 2 Digital output 3 Digital output 4 Digital output 5 Digital output 6 Digital output 7 Digital output 8 Table 2.1 GC-2018 module indicator Note: When using, please connect digital output signal to the terminal of GC2018 and connect the reference ground to the negative power supply of GCANPLC-400 or GCAN-IO-8000/8100 modules (corresponding to pins 5 and 6). 2.3 System statusindicator The GC-2018 module has no error indicator. The user can determine the status through the "IO RUN" and "IO ERR" indicators of the GCAN-PLC. If the "IO ERR"...

Vhandy technology DI0. AT represents the address of the variable access and the additional attribute of the variable. 2.5 Combined with GCAN- 8000series The state of the digital output is represented by one byte, with channel 8 in the high and channel 1 in the low. For example,when GCAN-8000 module node number is1,the output state of channel 8 and channel 4 of the first GC-2018 module is logic "1", and the output state of other channels is logic "0", the CAN data frame ID sent by the GCAN-IO-8000 module is 0x181,the data length (DLC) is 8,and the frame data is 0x88,0x00,0x00,0x00,0x00,...

Vhandy technology 3. Technical Specifications Interface characteristics Number of outputs Load types Nominal voltage output current (Max.) Electrical isolation Current consumption Bit width in the process image Installation position Power supply Operating temperature Permissible relative humidity EMC test Vibration/shock resistance EMC resistance burst/ ESD Protection class Dimensions Weight 8 resistive load, inductive load, lamp load; 24V DC(±20%) 500mA 500 V（GC-bus/ Signal voltage） 120mA output 1 byte In sequential order Powered by GCAN-PLC, current consumption 100mA Environmental testing...

Vhandy technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Vhandy technology Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com