GC-1502-2Channel Counter Module
13Pages

GC-1502 2-channel high speed counter module User manual

Revision History Modify device parameters Reset function upgrade Modify product picture Modify the document format

1. Introduction 1.1 Overview The GC-1502 module has integrated 2 counter digital input channels, which acquires digital signals in real-time and transmits them to the GCANPLC coupler. This module can be used with any other GC Series IO module to capture and process digital data in industrial automation or distributed control systems. 1.2 Properties at a glance ● 2 high speed input channels ● Input pulse voltage:5~30V ● Maximum input current:3mA ● Electrical isolation: 500 V(GC-bus) ● Current consumption:50mA ● 32-bitcounter ● No address setting, configuration via bus coupler or controller ●...

2. Installation This chapter will describe the installation method, wiring method, meaning of the indicator and meaning of the interface of the GC-1502 module. 2.1 Module fixing The installation method of GC-1502 module as shown in Figure 2.1 and a flat-blade screwdriver is needed for auxiliary installation. Figure 2.1 Installation of GC-1502 module First install the GCAN-PLC on the guide rail and plug the GC-1502 along GCAN-PLC's right side until the lock is stuck. When remove the GC-1502, the user need to release the self-locking mechanism by pulling out the orange label. The GC-1502...

Figure 2.2 Wiring method of GC-1502 module Figure 2.3 GC-1502 module terminal definition The wiring terminal block of GC-1502 module is shown in Figure 2.3. GC1502 contains 2 groups of pulse inputs, and can connect to 2 pulse signals at most. The corresponding serial numbers and definitions of each indicator are shown in Table 2.1

Pulse signal 1 NC Pulse signal 2 NC Signal 1 RST Signal 2 RST NC NC Table 2.1 GC-1502 module indicator 2.3 System statusindicator GC-1502 module has no error indicator light. Please judge the status of GC-1502 module by "IORUN" and "IOERR" indicator lights of the GCAN8000 series coupler. If the "IO ERR" indicator of the GCAN-8000 series coupler is on, please check the installation of the module. No. 1 2 3 4 5 6 7 8 Definition Module power indicator green light always on means the module power supply is normal, if it is not on, the power supply is abnormal Unused Module power indicator green...

Channel1Fre AT % I8.0: UDINT; Channel2Fre AT % I12.0: UDINT; Gc-1502 has two counter channels, INPUT1 and GND1 for the first group, INPUT2 and GND2 for the second group. When the pins of RST1 and RST2 of gc-1502 are connected to the high current, the corresponding counter channel's count value and frequency can be cleared. 2.5 Combined with GCAN- 8000series The state of the digital input is represented by two byte For example: the GCAN-IO-8000 module node number is 1, the channel 1 of the first GC-1502 module count 28685, and the frequency is 56849Hz, then the CAN data frame ID sent by the...

3. Technical Specifications Interface characteristics Number of inputs Pulse voltage Input current (Max.) Electrical isolation Counter bit Installation position Power supply Environmental testing Operating temperature Permissible relative humidity EMC test Vibration/shock resistance EMC resistance burst/ ESD Protection class Basic information Dimensions Weight 2 5~30V 3mA 500 V（GC-bus/ Signal voltage） 32-bit In sequential order Powered by GCAN-PLC series, current consumption 50mA -40℃~+85℃ 95%RH，no condensation EN 55024:2011-09 EN 55022:2011-12 EN 60068-2-6/EN 60068-2-27/29 EN 61000-6-2 /EN...

4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the product. In the...

5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com