GC-1008-8DI(PNP)
13Pages

GC-1008 8-channel digital input module (PNP) User manual

Vhandy technology Revision History Version Modify device parameters Modify device appearance picture

Vhandy technology

Vhandy technology 1. Introduction 1.1 Overview The GC-1008 module has integrated 8 digital input channels, which acquires digital signals in real-time and transmits them to the GCAN-PLC coupler. This module can be used with any other GC Series IO module to capture and process digital data in industrial automation or distributed control systems. 1.2 Properties at a glance ● 8 input channels ● Nominal voltage: 24V DC(±20%) ● Signal voltage "1":11~30V ● Signal voltage "0":-3~+5V ● Maximum input current:3mA ● Electrical isolation: 500 V(GC-bus) ● Current consumption:100mA ● The bit width input...

Vhandy technology 2. Installation This chapter will describe the installation method, wiring method, meaning of the indicator and meaning of the interface of the GC-1008 module. 2.1 Module fixing The installation method of GC-1008 module as shown in Figure 2.1 and a flat-blade screwdriver is needed for auxiliary installation. Figure 2.1 Installation of GC-1008 module First install the GCAN-PLC on the guide rail and plug the GC-1008 along GCAN-PLC's right side until the lock is stuck. When remove the GC-1008, the user need to release the self-locking mechanism by pulling out the orange...

Vhandy technology Figure 2.2 Wiring method of GC-1008 module Figure 2.3 GC-1008 module terminal definition

Vhandy technology Digital input 1 Digital input 2 Digital input 3 Digital input 4 Digital input 5 Digital input 6 Digital input 7 Digital input 8 Table 2.1 GC-1008 module indicator Note: When using, please connect digital input signal to the terminal of GC1008 and connect the reference ground to the negative power supply of GCANPLC-400 or GCAN-IO-8000 modules (corresponding to pins 5 and 6). 2.3 System status indicator Indicators Digital input1 is valid. Digital input 2 is valid. Digital input 3 is valid. Digital input 4 is valid. Digital input 5 is valid. Digital input 6 is valid. Digital...

Vhandy technology In the process of ST programming definition, gc-1008 module needs to define variable type, input signal position, start character, delimiter and so on. For example: "DI0 AT%I0.0:BOOL;" "0.0"represents the position of the input point, and "0.0"~"0.7" respectively define the 1-8 input points in the first GC-1008 module. When the user uses more than one GC-1008 module, the second GC-1008 shall be defined from "1.0" to "1.7", and so on. "%" (percent sign) is the direct variable starter; ":" (colon) is the variable or type separator. The Boolean is read from the %I0.0 address...

Vhandy technology 3. Technical Specifications Interface characteristics Number of inputs Signal voltage "1" Signal voltage "0" Input current (Max.) Electrical isolation Bit width in the process image Installation position Power supply Environmental testing Operating temperature Permissible relative humidity EMC test Vibration/shock resistance EMC resistance burst/ ESD Protection class Basic information Dimensions Weight 8 11~30V -3~+5V 3mA 500 V（GC-bus/ Signal voltage） Input 1 byte In sequential order Powered by GCAN-PLC, current consumption 100mA -40℃~+85℃ 95%RH，no condensation EN...

Vhandy technology 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form. Before using, please read this statement carefully. Once used, it is deemed to be an endorsement and acceptance of the entire content of this statement. Please strictly abide by the manual, product description and related laws, regulations, policies and guidelines to install and use the...

Vhandy technology 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension. The specific selection table is shown in Table 5.1. I/O relay output Voltage input, 16 bits Voltage input, 16 bits Digital input Current input, 16 bits Current input, 16 bits Voltage input, 16 bits Voltage input, 16 bits Thermal resistance Thermal resistance

Vhandy technology Voltage output, 16 bits Voltage output, 16 bits Current output, 16 bits Current output, 16 bits Voltage output, 16 bits Voltage output, 16 bits Voltage output, 12 bits Special module Analog output K type / S type / T type thermocouple GPRS extension WiFi extension Table 5.1 Selection table

Vhandy technology Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com