1. Catalogs
  2. Sheldon
  3. Peltier Cooled Series
video corpo

Peltier Cooled Series

Peltier Cooled Series

Peltier Cooled Series

Product catalog summary
Overview of Peltier Cooled Series Incubators
These incubators utilize innovative Peltier cooling technology, eliminating the need for a traditional refrigeration compressor. This results in over 70% power savings compared to alternative models and reduces room air conditioning loads by 75%. The units are equipped with strong shelves to prevent sagging and meet APHA specifications for Biochemical Oxygen Demand (B.O.D.). Key features include a mechanical convection system for even air distribution, a digital temperature set controller, over-temperature limit control, a door ajar alarm, and a digital temperature display.
SRI20P Testimonial
The Shel Lab SRI20P incubator is praised for its exceptional temperature uniformity, allowing the replacement of two compressor-based BOD incubators with a single unit. The testimonial highlights the convenience of the slide-out shelf, the sturdiness of the shelves, and significant energy savings. Clean Water Services, a water resources management utility, values the energy efficiency and reduced air conditioning loads provided by the SRI20P.
Model Specifications
  • Model Numbers: Available in 100-120V and 220-240V versions (SRI3P, SRI6P, SRI20P).
  • Dimensions: Vary by model, with options for countertop, under-counter, and large capacity.
  • Chamber Capacity: Ranges from 3 cu ft (85 L) to 19.3 cu ft (546 L).
  • Temperature Range: 15 - 30°C or 15 - 40°C depending on the model.
  • Bottle Capacity: From 84 to 300 bottles.
  • Shelves: Includes 2 to 5 shelves depending on the model.
Additional Features
  • Precise temperature control with superior uniformity (+/- 0.5ºC at 20ºC).
  • Independent over-temperature thermostat and alarm.
  • Door ajar alarm for added safety.
  • 2-year limited warranty.
For more detailed specifications, contact SHEL LAB or visit their website.
See more

Catalog excerpts

Peltier Cooled Series-1

Incubators Peltier Cooled Series Innovative peltier cooling technology, eliminates the need for a refrigeration compressor. These units use over 70% less power than alternative models and reduce room air conditioning loads by 75%. They also include strong shelves, which eliminates sagging. These incubators meet APHA specifications for Biochemical Oxygen Demand (B.O.D.) and include a mechanical convection system to ensure even air distribution, digital temperature set controller, over temperature limit control, door adjar alarm and a digital temperature display. SRI20P Testimonial The amazing temperature uniformity of the Shel Lab SRI20P allowed us to replace two compressor based BOD incubators with just this one unit. Previously, we had to use two units for our samples because the temperature uniformity spread was too large between the top and bottom shelves so that we could really only use the middle shelves. We definitely appreciate having more room in our lab. The slide out shelf is extremely convenient and the shelves in general are the sturdiest that I’ve seen in a BOD incubator. The energy savings* of the SRI20P is also a very important feature for me. Clean Water Services is a steward for public health, environmental protection and economic vitality. This goes hand-in-hand with the Shel Lab SRI20P’s energy efficiency and the reduction we will see in our lab’s air conditioning loads. Jim O’Reilly BOD Lab Specialist Clean Water Services Learn more about our Thermoelectric Technology Clean Water Services is a water resources management utility in the Tualatin River Watershed near Portland, Oregon. *Power savings for the unit is based on side by side comparison with a new compressor based LI20. Power draw and energy consumption based on startup, stabilization to 20C, 24/7 operation. Additional savings can be attained from AC load reduction as the SRI20P generates far less heat.

 Open the catalog to page 1
Peltier Cooled Series-2

Precise Temperature Control Superior Uniformity • • • • Limited Warranty! Independent Over Temperature Thermostat Over Temperature Alarm Door Ajar Alarm Temperature Uniformity +/- 0.5ºC at 20ºC Model Number BOD Incubators Under Counter Large Capacity Exterior Dimensions (wxdxh) Chamber Dimensions (wxdxh) Incubator Chamber Capacity Interior Outlet Temperature Range Bottle Capacity *All specifications are determined by using average values on standard equipment at an ambient temperature of 25°C (77°F) and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.