SPH Series Plastic Filter Housings • Economical alternative to metal filter housings in low pressure and cold water applications • Rugged design provides trouble-free service • Ideal for corrosive or sensitive fluids • Holds 10 and 20 inch length cartridges with DOE or internal o-ring end cap configurations • Holds standard 2 ½" and large 4½" diameter cartridges. • High temperature housings made of reinforced Nylon for use up to 200˚F (93˚C) • Meets FDA requirements for potable water and food and beverage applications. • Optional mounting bracket available for easy installation Applications Water Chemicals Food & Beverage Electronics DI Water Inks / Paints / Coatings Coolants Pulp & Paper Specifications & Operating Parameters Maximum Operating Pressure Materials of Construction 125 psig (8.75 bar) @ 125°F (93°C) Head: FDA grade Polypropylene Clear Sump: Styrean-Acrylonitritle Opaque Sump: Polypropylene Minimum / Maximum Temperature 40°F (°C) / 125°F (93°C) Connections Inlet /Outlet: Standard: 1/2" or 3/4" FNPT Heavy Duty (BB): 1" or 1 1/2" FNPT Gaskets Standard Optional Options EPR Viton Mounting Bracket Kits (See ordering guide for details) www.shelco.com

Dimensions D OUT MODEL A B C D E F SPH__5 SPH__10 SPH__20 SPH__10C SPH__20C SPH__10BB SPH__20BB SPH__10HT SPH__20HT 4.28" (10.9 cm) 4.72" (12.0 cm) 4.72" (12.0 cm) 5.35" (13.6 cm) 5.35" (13.6 cm) 7.28" (18.5 cm) 7.28" (18.5 cm) 5.35" (13.6 cm) 5.35" (13.6 cm) 1.57" (4.0 cm) 1.57" (4.0 cm) 1.57" (4.0 cm) 2.22" (5.6 cm) 2.22" (5.6 cm) 3.03" (7.7 cm) 3.03" (7.7 cm) 2.22" (5.6 cm) 2.22" (5.6 cm) 1.18" (3.0 cm) 1.18" (3.0 cm) 1.18" (3.0 cm) 2.28" (5.8 cm) 2.28" (5.8 cm) 3.03" (7.7 cm) 3.03" (7.7 cm) 2.28" (5.8 cm) 2.28" (5.8 cm) 0.16" (.40 cm) 0.16" (.40 cm) 0.16" (.40 cm) 0.23" (0.58 cm) 0.23" (0.58...