Catalogs >
Shelco Filters >
MicroVantage MPX Series

MicroVantage MPX Series
2Pages

Catalog excerpts

MicroVantage™ MPX Series Absolute-Rated (99.98%) High Performance Pleated Polypropylene Filter Cartridges • Absolute-Rated Beta 5000 (99.98%) retention efficiency • 7.0 square feet (0.65 m2) of media surface area per 10" length - Maximum throughput and particle retention - Longer service life reduces maintenance costs • 100% polypropylene construction offers wide range of chemical compatibility • Rigid, molded cage provides greater structural integrity • Gradient, fixed pore structure increases dirt-holding capacity and resists unloading under high differential pressure • Manufactured in state-of-the-art white room for high purity • Complies with Food & Drug Administration’s CFR criteria for food & beverage contact • Meets USP Class VI Biological Test for plastics • Various end cap configurations available to fit existing housings • Produced in continuous lengths up to 40 inches • Optional preflushed cartridges available for electronic and pharmaceutical applications Applications Specifications & Operating Parameters RO Prefilters Process Water Plating Solutions Chemicals Water & Wastewater Pore Sizes 0.2, 0.45, 1.0, 3.0, 5.0, 10.0, 20.0, 30.0, 40.0, 50.0 microns Maximum Operating Temperature 176F ( 80C) Nominal Lengths 9.75" (24.7 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm) Recommended Change-out Differential Pressure Outside Diameter 2.67" (6.78 cm) Maximum Differential (Collapse) Pressure Media Surface Area 7.0 sq. ft. (0.65 m2) per ten inches in length Gaskets/O-rings Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton (o-rings only) Filter Media: Outer Cage / Core / End Caps: 35 psid (2.4 bar) 75 psid @ 70°F (5.2 bar @21°C), 40 psid @176°F (2.8 bar @ 80°C) Inside Diameter 1.0" (2.54 cm) Materials of Construction Food & Beverage Bottled Water Microelectronics Paint/Inks Cosmetics Polypropylene Polypropylene Sanitization and Sterilization Hot water at 175°F (80°C) at 5 psid for 30 minutes In-line steam at 257°F (125°C) @ 1 psid (0.07 bar) for 30 minutes Autoclavable at 257°F (125°C) for 30 minutes FDA and USP Compliance All filters are manufactured of virgin polypropylene materials. All materials comply with FDA requirements for food contact per CFR Title 21 174.5, 177.1520 and 177.1630. All Components meet USP Class VI Plastics biological reactivity tests. www.shelco.com

Open the catalog to page 1

Flow vs. PressureSERIES MPX Drop DIFFERENTIAL PRESSURE BAR .28 Filter Removal Efficiency PSI 4 .21 PORE SIZE BETA 5000 99.98% BETA 100 99% BETA 50 98% 0.2 micron 0.45 micron 1.0 micron 3.0 micron 5.0 micron 10.0 micron 20.0 micron 30.0 micron 40.0 micron 50.0 micron 0.20 0.45 1.0 3.0 5.0 10.0 20.0 30.0 40.0 50.0 0.10 0.30 0.65 2.5 4.0 8.0 17.0 26.0 34.0 42.0 0.05 0.20 0.35 2.0 3.0 7.0 15.0 21.0 28.0 36.0 S3 E – END CAP CONFIGURATION GASKET / O-RING 0.2 µm 3 0.45 µm .14 2 1.0 µm .07 3.0 µm 1 5.0 µm 10.0 µm 20.0, 30.0, 40.0, 50.0 µm 10 GPM 0 .00 0 2 0 4 3.79 6 8 7.57 11.36 18.93 37.91 LPM...

Open the catalog to page 2