Catalogs >
Shelco Filters >
MicroVantage™- MD SERIES Polypropylene, and Glass Fiber Filter Elements

MicroVantage™- MD SERIES Polypropylene, and Glass Fiber Filter Elements
2Pages

Catalog excerpts

MicroVantage™- MD SERIES Polypropylene, and Glass Fiber Filter Elements - 1

Shelco’s MicroVantage™ pleated cartridges are designed to meet the standards of a wide spectrum of industries. From our general grade pleated cartridges designed for high purity applications at an economical cost to our P grade Glass cartridges with a final nonsheding layer of media, these cartridges are manufactured to the most stringent production standards making them the new benchmark of the industry. Materials of construction are specifically chosen to match each application independently. The Shelco MicroVantage™ cartridge should be your choice when critical retention is essential to the process. MicroVantage™ MD SERIES Polypropylene, and Glass Fiber Filter Elements Features • Each cartridge is rinsed to flush away any remaining manufacturing debris and wash away any extractables that may effect performance • Pharmaceutical grade elements are designed to be used as non-sterilizing grade cartridges • All materials of construction meet requirements of the FDA Title 21 of The Code of Federal Regulations • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop • Polypropylene or Glass construction offers a wide range of compatibility • Compatible with Chemical Sanitation, Autoclave, and In-Line Sterilization methods • Each cartridge is individually tested for integrity and efficiency at its rated pore size. • Each assembly is validated to pass USP Class 6 Toxicology extractable tests for plastics • All P Grade cartridges are double layered to ensure integrity Grade Definitions G Grade Designed for general-purpose use at an effective cost. Each cartridge is rinsed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. Each cartridge module is individually tested for integrity then wrapped and individually boxed. B Grade Designed for the food and beverage industry. Each cartridge is thoroughly rinsed with 18+ megohm-cm water to remove potential extraneous manufacturing debris. This ensures that all extractables, which may effect taste and performance such as foaming or brightness are removed. Each cartridge module is individually tested for integrity then wrapped and individually boxed. E Grade Designed to meet the special needs of the electronics and high purity chemical industries. Each cartridge module is pulse, power flushed until the rinse effluent reaches 17+ megohm-cm and less than 3 ppb TOC. Each cartridge module is individually tested to ensure integrity. P Grade Designed to be used as pre-filters and non-sterilization filters in the pharmaceutical industry. Each cartridge is double layered and flushed to remove potential extraneous manufacturing debris to ensure particle free filtrate. Each cartridge module is individually tested for integrity then wrapped and individually boxed P Grade As required by the FDA, our pharmaceuticals grade Glass Fiber Depth media cartridges are double layered and contain a final nonsheading downstream layer. This means they can be used without additional membrane cartridges downstream. These high capacity cartridges are used in pre-filter applications as well as final filter applications where the goal is bioburden reduction and not sterile product. Each cartridge is tested for integrity before shipment. Glass Fiber

Open the catalog to page 1

MicroVantage™- MD SERIES Polypropylene, and Glass Fiber Filter Elements - 2

MicroVantage™, MicroSentry™, ShelcoFilters®, and the Shelco Filters logo are registered trademarks of the Tinny Corporation Shelco Filters is a division of the Tinny Corporation. Product Specifications ORDERING GUIDE Bulletin: MDC-500.11 © 2005 Shelco Filters Pore Size Retention Ratings Efficiencies Polypropylene: 0.1, 0.22, 0.45, 0.65, 1.0, 3, 5, 10, 20, 30, 40 99.98% Glass: 0.3, 0.5, 1, 3, 5, 10, 20, 30 99 % PRODUCT END CAP CODE MEDIA MICRON LENGTH CONFIGURATION GASKET/O-RING GRADE MD P = Polypropylene 0.1 3.0 5 = 4 7/8” S1 = DOE w/Flat Gaskets B = Buna Blank = General G = Glass 0.22 5.0...

Open the catalog to page 2