Catalogs >
Shelco Filters >
MicroSentry™- MH SERIES 99.98% Efficiency - Pleated Filter Elements

MicroSentry™- MH SERIES 99.98% Efficiency - Pleated Filter Elements
2Pages

Catalog excerpts

MicroSentry™- MH SERIES 99.98% Efficiency - Pleated Filter Elements - 1

With the most complete line of pleated filter cartridges Shelco® offers the most economical high efficiency pleated elements available. For your most critical throughput, the MH Series is the best solution to your filtration problems. The cartridge is made of pleated Polypropylene media and has verified efficiencies of 99.98% at the rated micron. With more then 5½ square feet of media this cartridge will last longer and has a higher dirt holding capacity then any other cartridge available. With standard lengths to fit most housings, these cartridges are the perfect choice when economy and efficiency are critical. MH SERIES 99.98 Efficiency Pleated Filter Elements F eatures Applications • RO Prefilters • Cosmetics • Ultra pure water • Food & Beverage • Electronics • Photographic & Chemical solutions • Potable Water • Waste Water • DI Water Pre-Filtration • Solvents FDA Compliance Shelco® MicroSentry™ High Efficiency Cartridges are manufactured of pure polypropylene materials with no additives or other manufacturing agents. Shelco® certifies that all materials used in the production of these cartridges meet the requirements of FDA Title 21 of The Code of Federal Regulations 147.5 and 177.1520. • Micron ratings from 0.2 to 50 microns • Micron removal efficiency ratings at 99.98% • Meets requirements of the FDA for food and beverage applications • More surface area, more pleats, and more media offer higher dirt holding capacities • Polypropylene construction offers a wide range of chemical compatibility • Fixed pore construction allows for higher dirt holding capacity without unloading as the differential pressure increases • 5.5 Square feet of media MicroSentry™

Open the catalog to page 1

MicroSentry™- MH SERIES 99.98% Efficiency - Pleated Filter Elements - 2

MicroVantage™, MicroSentry™, ShelcoFilters®, and the Shelco Filters logo are registered trademarks of the Tinny Corporation Shelco Filters is a division of the Tinny Corporation. Product Specifications ORDERING GUIDE Bulletin: MHC-500.11 © 2005 Shelco Filters Microns Ratings 0.2,0.45,1.0, 3.0, 5.0, 10.0, 25.0, 50.0 Nominal Lengths 9 3/4”, 10”, 20”, 30”, 40” Materials of Construction Filter Media: Polypropylene Inner Core: Polypropylene Cage: Polypropylene Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Silicone Please consult with a Shelco Technician for proper...

Open the catalog to page 2