MicroSentry ™- MB SERIES Melt Blown Depth Cartridges

Product catalog summary

Introduction
Shelco® introduces its new melt blown cartridge made entirely of 100% Polypropylene, ensuring no additives or surfactants that could cause foaming or other undesirable effects. These cartridges are designed with graded density construction for maximum dirt holding capacity and are available in standard lengths to fit most housings, making them ideal for applications where economy and efficiency are crucial.

Features

Thermally bonded microfibers create a stable, self-supporting media.
Complies with FDA requirements for food and beverage applications.
Graded density construction provides true depth style filtration.
Wide chemical compatibility due to polypropylene construction.
Fixed pore construction enhances dirt holding capacity without unloading under increased differential pressure.
Available in various micron ratings (1 to 100 microns) and lengths up to 50 inches.
Multiple end cap configurations to meet specific requirements.

Applications

RO Prefilters
Plating Solutions
Photographic & Chemical Solutions
Food & Beverage
Electronics
Commercial & Residential Applications
Potable Water
Wastewater

FDA Compliance
Shelco® MicroSentry™ Melt Blown Cartridges are made from pure polypropylene materials without additives, meeting FDA Title 21 CFR 174.5 and 177.1520 requirements.

Product Specifications

Nominal Micron Ratings: 1, 3, 5, 10, 20, 30, 50, 75, 100
Nominal Lengths: 5”, 10”, 20”, 30”, 40”
Materials: 100% Polypropylene filter media, optional polypropylene end caps, and various gasket materials.
Operating Conditions: Maximum temperature of 140˚ F (60˚ C), recommended change out at 20 PSID.

Filter Housings
Shelco® offers a comprehensive range of filter housings, from single element to heavy-duty multi-rounds and bag housings, suitable for various filtration needs.

Ordering Guide
Product codes are structured to specify micron rating, length, end cap configuration, and gasket/O-ring material, allowing customization to specific requirements.

Contact Information
For more information, contact Shelco Filters at 860.854.6121 or visit their website at www.shelco.com.

Catalog excerpts

MicroSentry ™- MB SERIES Melt Blown Depth Cartridges-1

Shelco® leads the way with its all new melt blown cartridge. Made of 100% Polypropylene, there are no additives or surfactants used that will cause foaming or other undesirable effects to the throughput. With true graded density construction, these cartridges have the most dirt holding capacity available. With standard lengths to fit most housings, these cartridges are the perfect choice when economy and efficiency are critical. MB SERIES Melt Blown Depth Cartridges F eatures • Thermally bonded Microfibers create a stable self supporting media • Meets requirements of the FDA for food and beverage applications • Graded density construction provides true depth style filtration • Made of 100% Polypropylene with no surfactants that cause foaming • Polypropylene construction offers a wide range of chemical compatibility • Fixed pore construction allows for higher dirt holding capacity without unloading as the differential pressure increases • Available in 1, 3, 5, 10, 20, 30, 50 ,75,100 microns and lengths up to 50” • Different end cap configurations available to fit your specific requirements Applications • RO Prefilters • Plating Solutions • Photographic & Chemical solutions • Food & Beverage • Electronics • Commercial & Residential applications • Potable Water • Wastewater FDA Compliance Shelco® MicroSentry™ Melt Blown Cartridges are manufactured of pure polypropylene materials with no additives or other manufacturing agents. Shelco® certifies that all materials used in the production of these cartridges meet the requirements of FDA Title 21 of The Code of Federal Regulations 174.5 and 177.1520. MicroSentry™

Open the catalog to page 1

MicroSentry ™- MB SERIES Melt Blown Depth Cartridges-2

Cap Options MicroVantage™, MicroSentry™, ShelcoFilters®, and the Shelco Filters logo are registered trademarks of the Tinny Corporation Shelco Filters is a division of the Tinny Corporation. Product Specifications ORDERING GUIDE Bulletin: MBC-500.11 © 2005 Shelco Filters Nominal Micron Ratings 1, 3, 5, 10, 20, 30, 50, 75, 100 Nominal Lengths 5”, 10”, 20”, 30”, 40” Materials of Construction Filter Media – 100% Polypropylene End Caps (Optional) – Polypropylene Gaskets (Optional) – Various Materials Available Please consult with a Shelco Technician for proper compatibility Operating Conditions 140¢ª...

Open the catalog to page 2