High Purity
20Pages

High PurityCatalog SHELCO FILTERS > 1-800-543-5843 size="-1">

MICRO VANTAGE MA - GENERALPage 1 MA SERIES CARTRIDGES MICRO VANTAGE MA - BEVERAGEPage 3MA - ELECTRONICPage 5 MA - PHARMPage 7 MAT - PTFEPage 9 WGAS - WATER GRADEPage 11 MD - SERIESPage 13 MD SERIES CARTRIDGESSANITARY HOUSINGS S - SERIESPage 15VENT & DRAIN CODESPage 17 >

PESNYLONPOLY Asymmetric polyethersulfone membranes are designed for general purpose use wherever a cost effective membrane filter is required. Priced below special purpose cartridges, general grade cartridges are still manufactured with the same careful attention to both quality and performance as the special purpose cartridges. Filtration of bottled water and beverages for reliable microbial control. Electronics: DI water, acids, bases, oxidants and etch baths. Advantages are low protein-binding and broad chemical compatability with excellent throughput and low > ٢Ȇ P characteristics....

(0.22m challenged with Brevundimonas diminuta) (0.45 challenged with Serratia marscecens) (0.65 challenged with Saccharomyces cerevisiae) PESNYLONPOLY Asymmetric polyethersulfone membrane is designed for the food and beverage industry. PES is low protein binding and has excellent flow rates, therefore a good choice for fermented beverage filtration. The beverage grade is available with a pre-layer of poly depth media to extend the life of the cartridge in some applications. Sanitization: Industry standard concentrations of hydrogen peroxide, paracetic acid, sodium hypochlorite and other...

(0.22ٵm challenged with Brevundimonas diminuta) (0.45 challenged with Serratia marscecens) (0.65 challenged with Saccharomyces cerevisiae) PESNYLONPOLY Asymmetric polyethersulfone membrane is designed to meet the special needs of the electronics and high purity chemical industries. PES membrane cartridges are resistant to most acids, bases, alcohols, DI water, high temperature water and capable of handling strong sanitization agents. Sanitization: Industry standard concentrations of hydrogen peroxide, paracetic acid, sodium hypochlorite and other selected chemicals are designed to extend...

Polyethersulfone, Polypropylene and NylonMembrane Filter Elements > Shelcos new MicroVantage ҙ pleated membrane cartridges are designed to meet the high standards of the pharmaceutical industry. These cartridges are manufactured to the most strin- gent production standards making them the new benchmark of the industry. Manufactured in a ISO 9000 environment, each pharmaceutical grade cartridge has its own lot code for trace- ability and comes with a certificate of quality assurance. Each operation including assembly, testing, cleaning, drying and pack- aging is done in an appropriately...

PoreSizeRetentionRatings > 0.1, 0.22, 0.45, 1.0 and 3.0 Microns Pharmaceutical Grade available in 0.1 and 0.22 only MaterialsofConstruction > Filtration Media: PTFE Filtration Media Support: Polypropylene End Caps: Polypropylene Center Core: Polypropylene Outer Support Cage: Polypropylene Method of Construction: Thermally Bonded Gaskets and O-Rings Buna, Viton, Silicone, EPR, Teflon Encapsulated Silicone or Viton Sterilization ORDERING GUIDE Maximum Differential Pressures > Autoclave:In-Line Steam:127C, 30 min, multiple cycles135ںC, 30 min, multiple cyclesForward:Reverse:50 psi (3.4 bar) at...

Water Grade Polyethersulfone Absolute MembraneFilter Elements > Shelcoْs new MicroVantage pleated membrane cartridges are designed to meet a wide spectrum of industries. From our water grade pleated membranes designed for high purity applications at an economical cost to our integrity testable pharmaceutical grade membranes, these cartridges are manufactured to the most stringent production standards making them the new benchmark of the industry. The Shelco MicroVantageٙ cartridge should be your choice when absolute retention is essential to the process. Օ Օ Օ The MicroVantage Membrane...

Each cartridge is rinsed to flush away any remaining manufacturing debris and wash away any extractables that may effect performance > Օ Pharmaceutical grade elements are designed to be used as non-sterilizing grade cartridges > All materials of construction meet requirements of the FDA Title 21 of The Code of Federal Regulations > Օ Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop > Polypropylene or Glass construction offers a wide range of compatibility > Օ Compatible with Chemical Sanitation, Autoclave, and In-Line Sterilization methods >...

Pore Size Retention Ratings Efficiencies > Materials of Construction Filtration Media: Polypropylene Glass Glass P Grade > with non-sheding layer Polypropylene Glass Gallons per Minute Gallons Per Minute 0.05.010.015.020.025.0 0.05.010.0 15.0 20.0 25.0 0.30.51.03.05102030Pore Size Rating 0.100.220.450.651.003.005.0010.0020.0030.0040.00 Pore Size Rating This chart represents typical water flow @ 1 PSID per 10Д cartridge length. The test fluid is water at ambient temperature. Extrapolation for multiple elements tends to be linear, but as flows increase the DP of the housing becomes more...

Model Length Closure Style ֖ Connections ID-RA Finish Vent Drain Gaskets 1SIF51 2 3 4CClamp2222261 TC1.5 TC 2520 10 N = None1 = 1/2" TC 2 = San Valve 3 = San Valve Clamped 4 = 3/8" VCRN = None1 = 1/2" TC2 = San Valve3 = San Valve Clamped 4 = 3/8" VCRS = SiliconeE = EPR V = Viton B = BunaT = PTFETS = PTFE Encap. Silicone TV = PTFE Encap. Viton Standard Housing Per Drawing > Model Length ֖ Closure Style Connections ID-RA Finish ֖ Vent Drain Gaskets 1SF51 2 34CClamp2222261 TC 2520 10 N = None1 = 1/2" TC 2 = San Valve 3 = San Valve Clamped4 = 3/8" VCR5 = 1 1/2" TC gauge port with San Valve 6 =...

Model Length Closure Style ֖ Connections ID-RA Finish Vent Drain Gaskets 3SFV12 3 4CClamp2222261.5 TC2 TC1.5 BW2 BW 25 20 10 N = None1 = 1/2" TC 2 = San Valve 3 = San Valve Clamped 4 = 3/8" VCR 5 = 1 1/2" TC gauge port with San Valve6 = 1 1/2" TC gauge port with 1/2" TC vent 7 = 1 1/2" TC gauge port with 1/2" TC San Valve clamped N = None1 = 1/2" TC 2 = San Valve 3 = San Valve Clamped 4 = 3/8" VCRS = SiliconeE = EPR V = Viton B = Buna T = PTFE TS = PTFE Encap. Silicone TV = PTFE Encap. Viton Standard Housing Per Drawing Note: This housing does not have a removable tube sheet > Model Length...