FAS and FAC Series Single Cartridge Filter Housings with Bolt & Nut Closure for Air & Gases • Designed for industrial and commercial filter applications • Heavy duty construction for maximum durability • Various materials of construction for wide range of process requirements -- 304L or 316L stainless steel -- Brass nickel plated head with 304L SS body -- Cast Iron Head with a steel body • Accepts Double Open-End (DOE) cartridges • Available with 1/4", 3/8", 1/2", 3/4", and 1" connections. • Numerous gasket options for compatibility with most fluids • Bolt-nut-closure design for quick cartridge change outs (T-handle optional) • In line connections for easy installation • Knife edge seals at both end of cartridge housing eliminate potential bypass. Applications Water Chemicals Electronics Air Gases Desalination Food & Beverage Oil / Gas Inks / Paints / Coatings Pulp & Paper Specifications & Operating Parameters Maximum Operating Pressure Materials of Construction 250 psig (17 bar) @ 275°F (135°C) 125 psig (8.6 bar) @ 200°F (93.3°C): FAC-15 Series Head / Shell: FAS - 304L or 316L Stainless Steel FAC - Cast iron head / carbon steel Drain: FAS - Stainless Steel Plug FAC - Brass Petcock Connections Inlet /Outlet: 1/2", 3/4" or 1" FNPT 1/4" and 3/8" only available for FAC Series Optional: RF Flanges, Sanitary Ferrules, BSP Options Drain Port: 1/8" NPT (1/4" for FO-38 models) Gaskets Buna Optional: EPR, Silicone, Viton, Teflon, Neoprene, Vellumoid - Vent Port with Vent Screw - Gauge Ports - Bracket Kit - Variable Spring Load Seal - Tee Handle See Ordering Guide for complete selection of options www.shelco.com

MODEL QUANTITY (LENGTH) OF CARTRIDGES RATED FLOW CAPACITY SCFM MAXIMUM DIAMETER CARTRIDGE DRAIN SIZE 15 40 80 140 220 2 3/4" 2 3/4" 2 3/4" 2 3/4" 2 3/4" 1/4" 1/8" 1/8" 1/8" 1/8" STANDARD A FA-15 FA-39 FA-78 FA-80 FA-90 1 (1 7/8") 4" 1 (4 7/8") 2 1/4" 1 (913/4") 1/2" 1 (20") 1 (30") 8 1/4" 6 1/2" B 7 11/16" (19.5) 8 7/8" (22.5) 13 3/4" (34.9) 4" 23 7/8" (60.6) 33 7/8" (86.0) 5 3/4" (15.1) 6 15/16" (17.6) 11/13/16" (33.0) 21 15/16" (55.7) 31 15/16" (81.1) IN Dimensions OUT OUT OUT IN IN IN OUT * Based upon air with a 10 micron wound element 70˚F, 2 psid @ 80 psi. Rated capacities are guide lines...