- Catalogs
- Sheet Metal Men s.r.l.
- Rollforming line for production foothold rings
Rollforming line for production foothold rings
Rollforming line for production foothold rings
- Ring Diameter: Maximum 750 mm, Minimum 300 mm
- Wire Diameter: Maximum Ø10 mm, Minimum Ø8 mm
- Production Rate: 4 rings per minute
- Machine Components: Includes reel arm, straighten unit, length control unit with encoder, bending unit, and hydraulic shear unit
The rings produced are used to secure the synthetic rubber membrane to the lower part of expansion tanks. The heads of these tanks, made from cold-pressed carbon steel, can be either welded or clamped.
| Diameter of Expansion Tank (mm) | Capacity (liters) | Height of Expansion Tank (mm) |
|---|---|---|
| 324 | 24 | 415 |
| 404 | 35 | 410 |
| 407 | 50 | 530 |
| 450 | 80 | 610 |
| 500 | 105 | 665 |
| 500 | 150 | 900 |
| 600 | 200 | 815 |
| 630 | 250 | 960 |
| 630 | 300 | 1105 |
| 630 | 400 | 1450 |
| 750 | 500 | 1340 |
| 750 | 600 | 1555 |
| 750 | 700 | 1755 |
| 750 | 800 | 2145 |
Catalog excerpts
MACHINE PRODUCTION RINGS FOR EXPANSION TANKS TECHNICAL SPECIFICATIONS • Max/min diameter of rings: 750 / 300 mm • Max/min diameter of wire: 010 / 08 mm • The machine is composed by these unities: reel arm, straighten unity, control unity of the lenght with encoder, bending unity and hydraulic shear unity. Sheet Metal Men s.r.l. Via Luigi Cazzola, 35/E 36015 Schio (VI) Italy Tel. (+39) 0445 315431 Fax. (+39) 0445 319944 E-mail: [email protected] Web: www.sheetmetalmen.it
Open the catalog to page 1
The ring is used to fix the membrane of synthetic rubber to the inferior part of the expansion tank ( as you can see in the picture below). The heads of the expansion tank, made by carboon steel cold-pressed, can be welded or clamped. The schedule below give the lenght of rings produced by this machine according to the capacity . Sheet Metal Men s.r.l. Via Luigi Cazzola, 35/E 36015 Schio (VI) Italy Tel. (+39) 0445 315431 Fax. (+39) 0445 319944 E-mail: [email protected] Web: www.sheetmetalmen.it
Open the catalog to page 2All Sheet Metal Men s.r.l. catalogs and technical brochures
Flanging machine SMM-20005 Pages
Flanging machine SMM-16009 Pages
MARBLING MACHINE2 Pages
PLATE PACKAGES TILTERS1 Page
SURGE TANK FLANGES TESTING2 Pages
production foothold rings3 Pages
Presses for assembling2 Pages
PRESS FOR STRAIGHTENING1 Page
Trimming beading machine SMM5 Pages
HORIZONTAL SHEAR PIPE1 Page
- Industrial press
- Test machine
- Hydraulic press
- Forming press
- Test stand
- Making machine
- Automated production line
- Joining press
- Automated test bench
- Vertical press
- Leak tester
- Stamping press
- Column type press
- PLC-controlled press
- Hydraulic testing machine
- Sheet metal press
- Straightening press
- Hydraulic test bench
- C-frame press
- Rollformer