MACHINE PRODUCTION RINGS FOR EXPANSION TANKS

Product catalog summary

Technical Specifications
The document outlines the specifications for a machine used in the production of rings for expansion tanks. The machine can produce rings with a maximum diameter of 750 mm and a minimum diameter of 300 mm. It handles wire diameters ranging from Ø10 mm to Ø8 mm and has a production capacity of 4 rings per minute. The machine comprises several units: a reel arm, a straighten unit, a control unit with an encoder for length measurement, a bending unit, and a hydraulic shear unit.

Application and Usage
The rings produced are used to secure the synthetic rubber membrane to the lower part of the expansion tank. The tank heads, made from cold-pressed carbon steel, can be either welded or clamped. The document provides a table correlating the diameter of the expansion tank (and ring) with the tank's capacity in liters and its height in millimeters.

Key Data from Table
The table lists various diameters of expansion tanks, their corresponding capacities, and heights. For example, a tank with a diameter of 324 mm has a capacity of 24 liters and a height of 415 mm, while a tank with a diameter of 750 mm can have a capacity ranging from 500 to 800 liters with corresponding heights from 1340 mm to 2145 mm.

Catalog excerpts

MACHINE PRODUCTION RINGS FOR EXPANSION TANKS-1

MACHINE PRODUCTION RINGS FOR EXPANSION TANKS TECHNICAL SPECIFICATIONS • Max/min diameter of rings: Max/min diameter of wire: The machine is composed by these unities: reel arm, straighten unity, control unity of the lenght with encoder, bending unity and hydraulic shear unity. Sheet Metal Men s.r.l. Via Luigi Cazzola, 35/E 36015 Schio (VI) Italy Tel. (+39) 0445 315431 Fax. (+39) 0445 319944 E-mail: [email protected] Web: www.sheetmet

Open the catalog to page 1

MACHINE PRODUCTION RINGS FOR EXPANSION TANKS-2

The ring is used to fix the membrane of synthetic rubber to the inferior part of the expansion tank ( as you can see in the picture below). The coldheads of the expansion tank, made by carboon steel cold-pressed, can be welded or clamped. The schedule below give the lenght of rings produced by this machine according to the capacity . End parts welded Ring Diameter of expansion tank (and of ring) mm Capacity liter of expansion tank ltr Height of expansion tank mm Sheet Metal Men s.r.l. Via Luigi Cazzola, 35/E 36015 Schio (VI) Italy Tel. (+39) 0445 315431 Fax. (+39) 0445 319944 E-mail: [email protected]...

Open the catalog to page 2

All Sheet Metal Men s.r.l. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list