Shawseal TS2 Touchscreen Pneumatic Pouch Sealer Product Information With over 20 years of development, the Shawseal Pneumatic Pouch Sealer (PPS) range represents the best solution for sealing pouches and sachets where quality, efficiency and repeatability are paramount. Following on from the successful PPS model, Riverside have developed the new TS2 range, building on the proven and reliable design and adding new functionality via the cuttingedge touchscreen technology. As with the original PPS sealers, seal temperature, pressure and dwell time settings can all be altered. Operation will not be allowed until the set-points have been reached. These settings can only be altered via a PIN protected screen, giving an added layer of security to the operation. Within the touchscreen interface are a number of useful tools, including batch and master counters and a ‘calibration due’ and ‘calibration expired’ notification as well as the ability to ‘data-log’ every seal actuation. Once activated, the seal temperature, pressure and dwell time are logged along with a time and machine serial number stamp. This data can then be exported out as a spreadsheet allowing the TS2 and its sealing process to be comprehensively and reliably validated. Designed and manufactured in-house by Riverside Medical Packaging Ltd, the pouch/sachet sealers have a number of unique features that are standard to all units. Combined with that a wide choice of options are available offering the customer a product which suits their specific sealing requirements. The units are compact and attractively finished with all external surfaces being stainless steel or powder coated making them ideal for cleanroom or laboratory settings, whilst under the cover units are superbly engineered, being robustly constructed to cope with the demand of day in, day out production. Technical data subject to change. Printed Febr

The heat seal process is achieved by a heated platen jaw pressured against a silicone gasket. The heated jaw is available in 4 different standard profiles or can be produced to the customer’s specification. With the combinations available the Shawseal can cope with the most delicate of medical peel pouches through to heavy gauge laminate bags. Shawseal units require a 240V electrical supply and a 5 bar (70 psi) compressed air supply. The seal process is activated via a low voltage foot actuator (or via the touchscreen HMI) and cannot be interrupted or re-energised until the cycle is complete....