AcuLoop Plug In Display The Shaw Moisture Meters AcuLoop is a 4-20 mA, loop powered, plug in display module for use with the AcuDew dewpoint transmitter. Easy to install and lightweight, this four-digit, LED display is easily supported on the AcuDew dewpoint transmitter body. Where the AcuDew is installed horizontally or vertically, the AcuLoop can be rotated for optimum viewing with orientation adjustable to 210 degrees on its stem and 360 degrees (at four x 90-degree increments) on its axis. The AcuLoop connects via the robust M12 connector of the AcuDew dewpoint transmitter, which is loop powered through the AcuLoop display module. The 4–20 mA span is fully programmable to correspond with any AcuDew dewpoint range. When paired with the AcuDew, various dewpoint ranges are available covering an overall range from -120 °C to + 20 °C dewpoint (-184 °F to +68 °F). The output units can be displayed in °C dewpoint, °F dewpoint, ppm(V) or ppb(v). Self- contained, robust and with an IP65 rating, this display is ideal for use in a wide range of industrial environments where local indication is required. * AcuDew Dewpoint Transmitter sold separately Various ranges available: overall range -120 °C to +20 °C (-184 °F to +68 °F) dewpoint (with an AcuDew) • • • • • • Go (Gold): -120 to -20 °C DP, 0.1 ppb - 1,000 ppm(V) P (Purple): -100 to 0 °C DP, 0 - 6,000 ppm(V) S (Silver): -100 to -20 °C DP, 0 - 1,000 ppm(V) G (Grey): -80 to 0 °C DP, 0 - 6,000 ppm(V) R (Red): -80 to -20 °C DP, 0 - 1,000 ppm(V) B (Blue): -80 to +20 °C DP, 0 - 23,000 ppm(V) Weatherproof rating IP65/ NEMA 4 Large four-digit, digital display Output configurable in °C dewpoint, °F dewpoint, ppm(V) and ppb(v) 2 wire, loop powered integrated signal indicator Self-contained, robust and reliable 210 degrees axis rotation 4-20 mA retransmission signal 4-20 mA span configurable using the two-button layout on the display M12 connection for use with the

To order an AcuLoop Plug In Display Immunity: complies with EN 61000-6-1:2001 Emissions: complies with EN 61000-6-3:2000 R - Choose the required range of the AcuDew Dewpoint Transmitter using the AcuDew Specification Sheet. U - Choose required units for the AcuLoop display: Display: Four digit LED (height 9.2 mm) AcuLoop - Range (R) - Units (U) Display Accuracy: 0.2% F.S. Voltage Drop: 3.3 V DC C: °C dewpoint F: °F dewpoint P: ppm(V) B: ppb(V) Power Supply: 4-20 mA, 2-wire loop power To order an AcuLoop for an AcuDew with a measuring range of -80 °C to 0 °C (-112 °F to +32 °F) dewpoint (grey...