AcuLoop Plug In Display Instruction Manual
7Pages

Model AcuLoop Plug In Display Instruction Manual Issue 1

1.0 Unpacking Your Shaw Moisture Meters AcuLoop Please examine the AcuLoop package for any damage or mishandling. If any damage is evident please notify the carrier and the Shaw Moisture Meters representative from where this unit was purchased. You should have received (if ordered): • 1 AcuLoop plug in display • 1 instruction manual If anything is missing please contact your distributor immediately. General Description The SHAW AcuLoop is a 4 digit, LED, plug in display that connects directly to the AcuDew dewpoint transmitter. This plug in display is self contained, robust and reliable....

• 4 - 20 mA retransmission signal • 4 - 20 mA span configurable using the two button layout on the display • M12 connection for use with the AcuDew dewpoint transmitter and connecting cable 2.0 Connecting the AcuLoop to the AcuDew Dewpoint Transmitter BEFORE YOU BEGIN - DISCONNECT THE POWER 1. If the AcuDew is already connected to the cable, disconnect by turning the locking ring anti-clockwise. Align the keyed notch on the back of the AcuLoop with the keyed groove on the connecting cable and tighten. Finger tight only. Gently push the AcuLoop display on to the AcuDew. Turn the locking ring...

3.0 AcuLoop Plug In Display Module Setup Instructions TO POWER THE AcuLoop FOLLOW THE INSTRUCTIONS IN SECTION 3 OF THE AcuDew MANUAL REMOVE FRONT COVER TO ENTER THE MENU, PRESS BOTH BUTTONS AdjSET DECIMAL POINT SET THE DECIMAL POINT TO SAVE CHANGES, HOLD BUTTON THEN PRESS BUTTON. SELECT ACTIVE DIGIT (TO LEFT OF DECIMAL POINT) ADJUST VALUE SAVE SELECT ACTIVE DIGIT (TO LEFT OF DECIMAL POINT) ADJUST VALUE OPERATION NOTES INCREASE SET THE RESPONSE TIME • Response range 0 - 20 secs. • Default value 0 secs. • To save changes and skip to EXIT TO DISPLAY MODE the next variable hold then press...

4.0 Rotating the Display on its Axis Easy to install and lightweight, the AcuLoop is supported on the AcuDew dewpoint transmitter body. Where the AcuDew is installed horizontally or vertically, the AcuLoop can be rotated for optimum viewing, 360 degrees (at four x 90 degrees increments) on its axis. How to Rotate the Display 1. Unscrew and remove the glass window from the indicator unit. 2. Gently lever out the keyboard using a small plastic levering tool inserted behind the PCB. Ensure that no damage is done to the PCB or components. 3. Remove the two plastic blanking plugs which are...

7.0 AcuLoop Specification Electromagnetic Compatibility (EMC): Display: Immunity: complies with EN 61000-6-1:2001 Emissions: complies with EN 61000-6-3:2000 Four digit LED (height 9.2 mm) Display Accuracy: Voltage Drop: Overload Current: Power Supply: Output Signal: Operating Voltage: 7 - 24 V DC reverse polarity protected Operating Temperature: Rotating Angle: Weatherproof Classification: Mechanical Warranty: 24 months in case of faulty workmanship and defective parts 8.0 Guarantee All Shaw Moisture Meters products are guaranteed for two years from the date of purchase, some exclusions are...

AcuLoop Instruction Manual_Issue 1 © SHAW MOISTURE METERS UK (LTD) 2021 Shaw Moisture Meters (UK) Ltd. | Len Shaw Building | Bolton Lane | Bradford | BD2 1AF | England t. +44 (0)1274 733582 | f. +44 (0)1274 370151 | e. mail@shawmeters.com | www.shawmeters.com