Sharebot MetalOne custom development example System Customization Overview This technical solution was developed following a specific request from an end-user to optimize their research capabilities. The modifications were implemented on a Metalone platform featuring a 100*100 mm powder distributor and a 1kW fiber laser source. The primary objective was to adapt the machine for the integration of external diagnostic and auxiliary devices. The design includes dedicated supports and apertures that allow these devices to emit and receive electromagnetic radiation directed at the build platform. 1. Light Projection System A projection system has been integrated into the machine structure. • Mounting and Adjustment: The mounting interface includes fine-tuning points to calibrate the projector's position after installation. A locking screw secures the device at its theoretical inclination, though the mount allows for alternative angles if the screw is removed.

• Environmental Isolation: To separate the build chamber and the external environment, the machine frame and upper shell are equipped with high-quality borosilicate windows. • Wiring: Dedicated routing is provided within the chassis to allow the system's cabling to exit the machine externally. 2. Optical Monitoring System The standard internal camera has been replaced with a high-resolution optical imaging system to provide a larger and clearer field of view. • Optical Path: The interface between the build chamber and the electrical housing currently features a 1064nm green filter, which can...