Catalogs >
Shanghai Zhongji Machinery Co.ltd >
Zhongji slitting and cut to length line

Zhongji slitting and cut to length line
1Pages

Catalog excerpts

Zhongji slitting and cut to length line - 1

Slitting Machine l.The machine adopts the material shelf with a style of cantilever and opening umbrella to put material with no dynamic force. It can adjust the end of the screw mandrel of the material shelf to fit in with steel of different apertures. Easy to operating and its speed of putting materials and the main moulding machine is in phase. 2.The machine adopts Seven Rolls level correction, roll arbors adopt high-quality alloyed steel 40Cr, made with a heat treatment, and it has a perfect effectiveness of level correction to defect band steel. 3.The roller of the principal machine adopts the bearing steel Crl5 to strike, distressing to annealing, quenching, tempering, and Parkerizing, such heat treatment process. The surface hardness reachs HRC60 degree. 4.All the rollers are made by the numerical control lather, and this guarantees the accuracy of the roller's sizes and prolongs its working life. The cut to length line consists of decoiler, slitting machine and winder. Unit control adopts hydraulic system. It is featured in fine automatization, accurate slicing, orderly coiled material and complete types Slitting Line - Automatic Steel Sheet Slitting Machine The various lines cut from 0.4mm up to 10mm with different coil widths and weights. Each of this line can be custom tailored to meet specific production needs. Ferrous and non-ferrous metals such as cold or hot rolled carbon steel, stainless steel, aluminum,galvanized and different kinds of special alloys can be slit by these lines. By means of programmable logic controller (PLC), system performance is based upon the characteristics of various metal sheets, and switches high / low speed operating mode automatically, so as to achieve improved efficiency and reduced maintenance dramatically. For lower malfunctioning, the material uncoiler uses an expand / shrink hydraulic cylinder that is mounted on an integrated steel frame.The materialuncoiler is equipped with a high efficiency disctype brake, its tension is adjusted by the air-pressure loop. Under this circumstance, the time for tension adjustment is reduced, the forced monetary braking is occurred thus free from loosen of coil.

Open the catalog to page 1