ZCT390E-SWP-L LoRaWAN 868MHz Europe Wireless Inclinometer Sensor
12Pages

www.zc-sensor.com A/0 ZCT390E-SWP-L Inclinometer Specification I. Introduction ZCT390E-SWP-L wireless inclinometer is a high accuracy tilt sensor developed by Shanghai Zhichuan. Based on LoRaWAN wireless transmitting technology, the inclinometer is capable of detecting ±90°C tilt. It Can be widely used in municipal projects, telecommunications, thermal, water, electricity and other industries. III. Applications • safety control • monitoring • alarming Oustanding Performance Industrial Class Components LoRaWAN communication Lower Power Consumption IV. Technical Spec : (Data collected at room temperature of 25C, unless otherwise specified)

Note 1 : Limited by the physical law of calculating the inclination by measuring the gravity acceleration, the product calibrated angle range (factory setting) is -60~ + 60 degrees. Beyond this range, the resolution and accuracy of the product will be reduced a lot, and the general accuracy can reach 3-5 degrees or even greater. If not specified, the product measurement range is -60 to 60 degrees. Note 2: Resolution refers to the minimum variation that can be detected by the sensor while working in its valid range. Note 3 :Under Relative Measuring Mode ,without alarm ,heartbeat rate once...

alarm message. When alarm message is sent, if the sensor gets the ACK but doesn't receive application layer command for cancelling, it will replace later heartbeats with the alarm message. When tilt angle returns to normal, the alarm will be cancelled. Note: Customers can flexibly choose the alarm mode according to their application. However, the absolute measurement mode consumes more power than the relative measurement mode, while the real-time performance is slightly lower than the relative measurement mode. VI. (Inner) LED Indicator status description. After power-on, the red light,...

NOTE:n is determined by data length b. When the frame is an upstream heartbeat frame or an alarm frame, the data packet refers to -4-

www.zc-sensor.com A/0 the content of the data structure table.; c. When the frame is a downstream parameter setting frame, the data packet refers to the content of the data structure table; d. When the frame is the upstream return parameter setting frame, the data packet refers to the setting result table, the data ID is the same as the ID of the data structure table. If no ID and the returning data length is 0, and the data range has no content.; e. When the frame is a downstream parameter read frame, except for the data ID of 0x00, other data packets only contain the data ID, and do not...

Analysis: Packet 1—The product model number is 02. The first byte of the data packet 0x02 is the product model data ID, the second byte 0x01 is the data length, 0x01 is the data content, the Byte (1) type, the product is fixed to 0x02; ; Packet 2—The X-axis angle is -1.3. The first byte of the data packet 0x03 is the X-axis angle data ID, the second byte 0x04 is the data length, and the 0xBFA8B193 data content is the FLOAT(4) -6-

www.zc-sensor.com A/0 type, and its value is -1.3 (reserving one decimal) in degrees. Packet 3 - Y-axis angle is -4.0 degrees. The first byte of the data packet 0x04 is the Y-axis angle data ID, the second byte 0x04 is the data length, 0xC07D3828 is the data content, the FLOAT(4) type, and its value is -4.0 (reserving one decimal), the unit is degree; Packet 4 - The sensor temperature is +23.91 °C. The first byte of the data packet 0x0C is the temperature data ID, the second byte 0x02 is the data length, 0x0957 is the data content, and the Word(2) type indicates that the temperature is...

www.zc-sensor.com ®7A: A/0 Packet 4 - The sensor temperature is +23.93 °C. The first byte of the data packet 0x0C is the temperature data ID, the second byte 0x02 is the data length, 0x0959 is the data content, and the Word(2) type indicates that the temperature is +23.93 (the temperature value is the data value /100), the unit is °C.; Packet 5 - The battery voltage is 2.58V. The first byte of the data packet 0x0D is the battery voltage data ID, the second byte 0x02 is the data length, 0x0102 is the data content, and the Word (2) type indicates that the battery voltage is 2.58 (the voltage...

Packet 1—Indicates setup product software reboot. The first byte of the packet is the software

restart data ID, the second byte is the data length, and write 0xA5 to third byte to restart the product immediately. (Note: The software reboot takes effect immediately, no return. If connects to the network is successfully after reboot, it will upload a heartbeat data within 30s.) IX.Network parameter setting command 3.3V TTL interface, baud rate 115200, check digit: none, data bit: 8, stop bit: 1. No additional characters (escape character or carriage return, etc.) are required at the end of the transmission data. 1. *COMMAND—Enter configuration mode； 2. #RESET—Software restart command；...

21. mac get_nwkid—read NETWORK ID； Otaa network access steps: send command order 1.-> 4. -> 7. -> 8. -> 10. -> 18.-> 2. After the command is sent, the product will reboot; (Note: the bold italic is Configuration parameters, need to be modified according to the application) Abp network access step: send command order 1.-> 5. -> 12. -> 13. -> 14. -> 18. -> 2. After the command is sent, the product will reboot; (Note: a. bold italic is configuration parameter, needs to be modified according to the application; b. After the reboot, the node abp upstream and downstream serial numbers are reset...

Ordering Information： ZCT390E-SWP-L This information is for project evaluation only. Please contact us for official instructions when testing samples and official delivery! 上海直川电子科技有限公司 地址：上海市闵行区灯辉路