Catalogs >
Shanghai Zhichuan Electronic Tech Co., Ltd >
ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery
7Pages

Catalog excerpts

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 1

Dual-axis tilt sensor specification ZCT245J-LCS-E3-145 Doc.NO : WI-XS-743-012 version : A/0

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 2

ZCT245J-LCS-E3-145 dual-axis tilt sensor specification_ I.General description ZCT245J-LCS-E3-145 dual-axis tilt sensor is design and produce by ZC SENSOR. Measuring range:± 45° CAN communication Industrial devices entirely Stable and reliable performance cast aluminum housing with IP65 protection grade Wide power supply reverse power protection III.Applications Angle test Safe control,monitoring,alarm Standard control, bend control Tilt attitude recorder (unless special mark, the following data are typical value in room environment 25 C) Test condition Operation parameter Performance...

Open the catalog to page 2

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 3

Statu format: (i.e. bit5=l, Y-axis is out of the measure range ; reserved=0) Reserved Sensor out Sensor out reserved EEPROM Sensor Sensor of range Y of range X Error Error Y Error X Angle expression: XO means low byte of axis X angle output,XI means high byte of axis X angle output. YO means low byte of axis Y angle output,Y1 means high byte of axis Y angle output. Transformation relationship: Resolution 0.01 degree: 0 means 0 degree ;3E8(hexadecimal) means +10 degree; FC18 means -10 degree Angle = 0x3E8/100 = 1000/100 =10; ' " Remark: positive angle express as hexadecimal, eg. +8 degree...

Open the catalog to page 3

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 4

2.Modify the CANJD (Node_ID=l~127) , default NodeJD is 0x16. Table 1-4 SDO answer message format Remark: The 5th byte(Baud) can be 0x00^ 0x01> 0x02n 0x03> 0x04> 0x05 or 0x06. 0x00 means baud rate 1000K, 0x01 means baud rate 800K, 0x02 means baud rate 500K, 0x03 means baud rate 250K, 0x04 means baud rate 125K, 0x05 means baud rate 100K, 0x06 means baud rate 50K. Default baud rate is 250K, it can be saved after power off, that is, if set the baud rate as 800K, and the baud rate is still 800K when next power on. And the command can be executed when power on.

Open the catalog to page 4

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 5

There's high speed photoelectric isolated module in the CAN module, the sensor don't need Ground connection.CAN output extended frame. Defaulted baud rate of CAN is 250K. VI. Wire installation and pin definition In order to get biggest range of angle variation,sensor should be installed horizontally when the carrier or platform is normal. Wire connection: CAN_H CAN_L Size diagram with installation plate AZB —03:

Open the catalog to page 5

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 6

VII. Installation attentionsnition he sensor should be installed horizontally. Otherwise the output angle value will have deviation. Order information: Optional component: AZB-03; Countersunk head screw: M4*12; Guarantee Card Product Name: Dual-axis tilt sensor Data of purchasing: Time limit of Guaranteeing: Company Purchasing: Product SN: Record of mending: Report Time; Reasons of fault; Reporter; Results of mending;_ Information of customer holding this Guarantee Card;_ Note: This card is the basis for user enjoying maintaining and upgrades service.

Open the catalog to page 6

ZCT245J-LCS-E3-145 Normal accuracy low cost robust 2 axis digital tilt sensor for agriculture machinery - 7

Shanghai Zhichuan ElectronicTech Co., Ltd. Address:3/F Compositive Building, No.1128 Denghui RD, Minhang Shanghai, China 0086-21-64908093 64908097 (T) 0086-21-64906992 (F) Postcode:201109 http://www.inclinesensor.com/ E-mai I :sa les@zc-sensor.com

Open the catalog to page 7