Catalogs >
Shanghai Zhichuan Electronic Tech Co., Ltd >
ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform
8Pages

Catalog excerpts

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 1

SMART SENSOR

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 2

[TILT SWITCH CONSTRUCTION PROFILE]Out Iook I. Introduction-----------------------------------------------1 V.lnstruction and wire definition

Open the catalog to page 2

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 3

ZCT215L-LQS-A1G-4007Tilt Switch I. Introduction ZCT215L-LQS-A1G-4007 is a new generation cost-effective dual axis tilt switch researched and developed by ZC Technology. This product is based on the 32-bit high-performance microprocessor, which is calibrated to the zero deviation and sensitivity deviation of the sensor to ensure the reliability and consistency. The sensor comes with its own blister, by looking at the water bubble position and setting the zero button, so as to meet the requirements of the site and be convenient to the user. II. Features Built-in 32-bit microprocessor, faster...

Open the catalog to page 3

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 4

Remark 1: Resolution is the minimum amount of change that the sensor can detect in the measurement range. Remark 2: Accuracy is the difference between the output value of the sensor and the true corresponding input value. l.Housing dimension ( Unit : mm ) : ( Default horizontal mounting )

Open the catalog to page 4

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 6

3. Instruction : 1) Status indication When the product powered on first time, the indicator light flashes red and green twice alternatively, then green or red light normally on. (Green light on indicates the tilt angle is under non-alarm state, electrical switch on; when red light on indicates the tilt angle is under alarm state, electrical switch off.) After tilt angle is continuously larger than the preset alarm angle for 1,5s (alarm delay 1.5s), the inside electrical switch off, alarm signal cable output is high-impedance state. After green light flashes, the green light off, red light...

Open the catalog to page 6

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 7

Guarantee Card Product Name: Tilt Switch Part No.: ZCT215L-LQS-A1G-4007 Data of purchasing: Time limit of Guaranteeing: Company Purchasing: Product SN: Record of mending: • Report Time: • Reasons of fault:_ • Reporter: • Results of mending:_ Information of customer holding this Guarantee Card:_ Note:This card is the basis for user enjoying maintaining and upgrades service. Shanghai Zhichuan Electronic Tech Co.,Ltd. Address:Compositive Building.No.il28 Denghui RD.Minhang Shanghai,China 0086-21-64908093 64908096 (T) 0086-21-64906992 (F) 021-64908096 Postcode: 201109...

Open the catalog to page 7

ZCT215L-SQS-A1G-4007 Tilt Switch for Tower Crane and Aerial Work Platform - 8

Shanghai Zhichuan Electronic Tech Co.,Ltd. Address:3/F Compositive Building,No.1128 Denghui RD.Minhang Shanghai,China 0086-21-64908093 64908096 (T) 021-64906992 (F) Postcode: 201109 http://www.inclinesensor.com E-mail:sales@zc-sensor.com

Open the catalog to page 8