ZCT1XXXJ-LNX-140 series single axis inclinometer I. General description: ZCT1XXXJ-LNX-140 is 1-axis analog voltage output tilt sensor researched and produced by Shanghai Zhichuan. 0.5～4.5V output voltage. Industrial devices entirely, high stability and reliable performance Shockproof, anti-seismic High cost performance Protection class IP54 Torque limiter and arm angle measurement of aerial vehicle. Medical equipment, mining machinery, oil drilling equipment Dam, construction, bridge angle measurement IV. Technical specification （ Unless otherwise specified, the following parameters were measured at room temperature 25° C) Compositive specification Item Test condition Operating temperature Other Shanghai Zhichuan Electronic Tech Co.,Ltd ADD: 3F, #6 Building, No.639 Guangzhong Road, Minhang, Shanghai, 201108, China. TEL: +86-021-64908096 E-mail:sales@zc-sensor

Zero tempera Single axis Single axis Single axis Single axis ①：Non-linearity means the deviation between the best fitting line and the output curve of the range from 0° to +180°. ②：Sensitivity is definited as Vsens ={Vout(@Measuring range)-Vout(@-10°)}/{Measuring range}[mV/°] ③：When the sensor works, make sure it is in the allowable supply range, and 12V is introduced. V. Notice: 1. Vertically installed, cable toward down, the output is 0°, voltage output is 0.5VThe output voltage will be increased when the sensor rotate in clockwise 2. Output voltage and angle Angle ＝（output voltage－zero output...

VI. Mounting size and wire connection: Wire connection：Red：VCC Black：GND Yellow：Voltage output Order part number：Please select part number according your required specification The cable length is 25cm, if customer need longer cable, please order it as accessory Specifications subject to change without notice! Shanghai Zhichuan Electronic Tech Co.,Ltd ADD: 3F, #6 Building, No.639 Guangzhong Road, Minhang, Shanghai, 201108, China. TEL: +86-021-64908096 E-mail:[email protected] Http://www.zc-sensor.c