video corpo

ZCT190J-LNS-20

ZCT190J-LNS-20

ZCT190J-LNS-20

Product catalog summary
General Description
ZCT190J-LNS-20 is a cost-effective single-axis tilt sensor developed by Shanghai Zhichuan Electronic Tech Co., Ltd. It features a vertical installation with a 0.5 to 4.5V analog output, utilizing a MEMSIC device and digital micro process control technology.

Features and Applications
The sensor is designed with industrial-grade components, offering stable and reliable performance. It is shockproof up to 10000g and supports a wide voltage power supply of DC 9-25V with reverse polarity and short circuit protection. The device is housed in cast aluminum with IP65 protection, suitable for use in chain blocks, hoists, cranes, aerial platforms, mining equipment, and security systems.

Technical Specifications
  • Operating Specifications: Supply voltage ranges from 9 to 30V DC, with a quiescent current of 25 to 30 mA. The operating temperature is between -20°C and +60°C, and the storage temperature ranges from -40°C to +85°C. The cable length is 50 cm.
  • Performance Specifications: The measuring range is 0 to +90°, with an output voltage of 0.5 to 4.5V. The output voltage resolution is 4.4 mV, and the accuracy is 22 mV. The zero temperature drift is ±1.5° within -20 to +60°C, and the response frequency is 2 Hz.

Installation and Connection
The inclinometer should be installed vertically, with the angle increasing as it rotates clockwise. The output voltage increases with the angle. The wire connections are defined as follows: Red wire for +24V, Black wire for 0V, and Yellow or Green wire for voltage output.

Notes
  • Ensure the mounting surface is vertical to the horizontal plane to avoid measurement errors.
  • Maintain stable input voltage for accurate voltage output.
  • Rotate the device according to the arrow's direction to increase the angle.
  • The output voltage and angle calculation formula is Vout = 0.5V + (Angle) × 4 / 90 V, with the angle ranging from 0.0° to +90.0°.

Specifications are subject to change without notice.
See more

Catalog excerpts

ZCT190J-LNS-20-1

ZCT190J-LNS-20 Single-axis Tilt Sensor General Description ZCT190J-LNS-20 is a single-axis tilt sensor with low cost researched and produced by Shanghai Zhichuan Electronic Tech Co.,Ltd. This product is in single axis structure, installed vertically. 0.5~4.5V analog output. The inner sensor is MEMSIC device. It adopt completely digital design of micro process control technology, add proper ASIC circuit, finally get analog voltage output. Entirely industrial parts of apparatus, stable and credible performance Shockproof>10000g DC 9-25V wide voltage power supply, Reverse polarity protection, over loading short circuit protection. Chain block, Hoist, crane, Aerial platform vehicle, lifter Automatic orientation platform Mining Security control, monitor, alarm Technical Specification(Unless otherwise specified, the following parameters were measured at room temperature 25° C) Min parameter Test condition Quiescent current Operating Operating Specification Unit value temperature Cable legnth Storage temperature Performance Measuring range Output voltage Shanghai Zhichuan Electronic Tech Co., Ltd Address: 3F, #6 Building, No.639 Guangzhong Road, Minhang, Shanghai, 201108, China Tel: +86-21-64908093/64908096 E-mail: sales@zc-sens

 Open the catalog to page 1
ZCT190J-LNS-20-2

range Output voltage 4.4 resolution Output voltage accuracy Zero temperature -20~+60℃ drift Response Note 1: Please keep mounting surface of device vertical to horizontal plane. Otherwise, it will caused measuring range smaller than actual angle. Note 2: Voltage output accuracy means Root Mean Square Value of measured error for several times (≥16 times) during measuring range. Measured error means the difference between , n is measured times, it should be ≥10, measured error for each time. Note 3: Please keep the stability of input voltage as possible as you can, because it will influence the...

 Open the catalog to page 2
ZCT190J-LNS-20-3

Module Installment Size and Definition of Connection Wire connection definition: Red wire -------------- +24V Black wire -------------- 0V Yellow wire ( or Green) -------------- voltage output Specification subject to change without notice! Shanghai Zhichuan Electronic Tech Co., Ltd Address: 3F, #6 Building, No.639 Guangzhong Road, Minhang, Shanghai, 201108, China Tel: +86-21-64908093/64908096 E-mail: [email protected]

 Open the catalog to page 3

All Shanghai Zhichuan Electronic Tech Co., Ltd catalogs and technical brochures

  1. ZCT-CX09

    10  Pages

  2. ZCT-CX300

    18  Pages

  3. ZCTR04

    4  Pages

  4. ZCT190J-LPS-A

    3  Pages

  5. ZCT190AL-V1

    5  Pages

  6. ZCT181J-LMS

    3  Pages

  7. ZCT190J-SPS-A

    6  Pages

  8. ZCT175J-NMQ

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.