ZCT1360J-LPS-A-75 Single Axis Inclinometer Current output Tilt Sensor

Product catalog summary

General Description:
ZCT190J-LPS-A-75 is a current type 1-axis tilt sensor developed by Shanghai Zhichuan Electronic Tech Co., Ltd. It measures angles within a range of ±90° and outputs a standard 4-20mA signal. The sensor is designed for excellent anti-jamming capabilities, making it suitable for long-distance signal transmission. It features a protection grade of IP67 and can withstand shocks up to 1000g.

Features:

Standard 4-20mA current output
IP67 waterproof rating
High shock resistance

Applications:

Angle measurement of machine arms
Load moment limiter

Technical Specifications:

Supply Voltage: 8-30 V (DC)
Quiescent State Current Output: 11-15 mA at Vcc=24V
Load Resistance: 600 Ω at VCC=24V
Operating Temperature: -40 to +85 ℃
Response Frequency: Optional 0.5, 2.5, 20 Hz
Housing Size: 54x44x18 mm

Performance Specifications:

Measuring Range: -90° to +90°
Resolution: 0.1°
Non-linearity: ±0.15%/FS at 25℃, ±0.3%/FS from -10℃ to +60℃, ±0.4%/FS from -40℃ to +85℃
Sensitivity: 87.89-89.89 uA/°
Zero Current Output: 3.92-4.08 mA
Zero Temperature Drift: ±0.5° from -10℃ to +60℃, ±0.8° from -40℃ to +85℃

Product Part Number Introduction:
The part number ZCT190J-LPS-A-75 indicates a 1-axis sensor with an aluminium housing, 4-20mA output, and a measuring range of 360 degrees. The '7' in the part number denotes a rubber grommet cable lead-out format.

Use Instruction and Pin Definition:

Conversion Formula: angle = (Iout - 4mA) / sensitivity
Pin Definitions: PIN1—power anode; PIN2—NC; PIN3—power negative; PIN4—Iout
Mounting Method: The sensor is at 0° when the lead-side is vertically down to the ground. Iout increases if rotated counterclockwise.

Wire Color Functions:

Red: Power supply (8-30V)
Black: Ground (GND)
Yellow: Current output (Iout)

Installation and Housing Dimension:
Specifications are subject to change without notice. The housing dimensions are provided in millimeters.

Catalog excerpts

ZCT1360J-LPS-A-75 Single Axis Inclinometer Current output Tilt Sensor-1

ShanghaiZhichuan Electronic Tech Co., Ltd.

Open the catalog to page 1

ZCT1360J-LPS-A-75 Single Axis Inclinometer Current output Tilt Sensor-2

V.Product part number introduction--------------------------------- 2 VI.Use insruction and pin definition--------------------------------- 3 VII.Installation and Housing Dimension

Open the catalog to page 2

ZCT1360J-LPS-A-75 Single Axis Inclinometer Current output Tilt Sensor-3

ZCT1360J-LBS-BUS-77 INCLINOMETERSPECIFICATION I.General description: ZCT190J-LPS-A-75 is current type 1-axis tilt sensor which is reseached and produced by ZC. Measuring range is ±90°, output standard 4~20mA. It has pefert anti-jamming characteristic, adapt to long distance signal transmission. II. Features Standard 4-20mA current output Protection grade: IP67 Greater shookproof of 1000g III. Applications Angle measurement of machine arm Load moment limiter

Open the catalog to page 3

ZCT1360J-LPS-A-75 Single Axis Inclinometer Current output Tilt Sensor-4

Perf orm ance spec ifica tion Remark 1: Resolution is the smallest angular change which can be measured by inclinometer. Remark 2: Non-linearity means the devation degree between output curve and the best fitting line. Remark 3: Sensitivity is definited as Isens ={Iout(@90°)-Iout(@0°)}/{90°}[mA/°] Product cable lead out format, for example, 0 represent M10 connector, 7 represent rubber grommer Product working voltage, for example, S means 8 -30V Product output interface: P is 4 -20mA Housing, L is aluminium housing -► Measuring range, for example, 360 represent measuring range is 360 degree 1...

Open the catalog to page 4

ZCT1360J-LPS-A-75 Single Axis Inclinometer Current output Tilt Sensor-5

Vl.Use instruction and Pin definition: I.Conversion formula of angle and current: angle =(lout — 4mA) /sensitivity 3.Mounting method: it is 0° when lead-side vertically down to ground, and Iout will increase if it is rotated in anticolck wize.

Open the catalog to page 5