ZCT115J-SQQ-80 Horizontal mounted Tilt Sensor voltage output

Product catalog summary

General Description: The ZCT115J-SQQ-80 is a 1-axis inclinometer developed by Shanghai Zhichuan Electronic Tech Co., Ltd. It features a measuring range of +/-15 degrees and provides an analog voltage output of 1-4V. The device is designed for horizontal mounting.

Features: The inclinometer is characterized by its small size, lightweight, and ease of integration. It offers high stability, reliable performance, shockproof and anti-seismic capabilities, and a high cost-performance ratio. It is rated with a protection grade of IP67.

Applications: The device is suitable for use in aerial work platforms and other industrial devices.

Technical Specifications:

Operating Parameters: Supply voltage ranges from 4.5 to 5.5 V DC, with a quiescent current of 15-18 mA. The output impedance is 200 Ω, and it operates within a temperature range of -40 to +85°C. The cable length is 0.15 to 0.25 meters.
Technical Parameters: The measuring range is ±15°, with a linearity range of ±10°. Zero output voltage is between 2.35 and 2.65 V at Vcc=5.00V. Non-linearity is ±0.4%, sensitivity is 100 mV/°, and sensitivity error is ±3%. Zero temperature drift is 0.03°/°C.

Input and Output Features: When powered off, the output is 0V. If the ground wire is disconnected, the output is 4.5-5V. Clockwise rotation of the sensor decreases the output voltage.

Wire Definition: The device uses three wires: brown for Power+ (VCC +5V), black for Power- (GND 0V), and yellow/green for Voltage output (Vout).

Size and Installation: The device is housed in plastic, with dimensions provided in the installation diagram.

Order Information: Part number for ordering is ZCT115J-SQQ-80. Specifications are subject to change without notice.

Catalog excerpts

ZCT115J-SQQ-80 Horizontal mounted Tilt Sensor voltage output-1

II. Features: Small volume, light weight, easily intergrated; Industrial devices entirely, high stablity and reliable performance; Shockproof,anti-seismic; High cost performance; Protection grade: IP67o www.zc-sensor.com _Ver:A/0 Inclinometer Specification I. General description: ZCT115J-SQQ-80 is 1 -axis tilt sensor which is researched and produced by ZC. The measuring range is +/-15 degree. It is analogy voltage 1-4V output, and horizontal mounted.. III. Applications: Aerial work platform IV. Technical specification: 1. Operating parameter: Shanghai Zhichuan Electronic Tech Co.,Ltd - 1 - ADD: 3/F,1128 DenghuiRd, Minhang district, Shanghai, 201109,China. TEL: +86-021-64908096 E-mail: [email protected] Http://www.zc-sensor.com

Open the catalog to page 1

ZCT115J-SQQ-80 Horizontal mounted Tilt Sensor voltage output-2

www.zc-sensor.com Document NO.:WI-JS-591-006Ver:A/0 Note: Remarks1:Non-linearity means the deviation between the best fitting line and the output curve of the range from -10° to +110°; Remarks2: sensitivity is definited as: Vsens ={Vout(@+10°)-Vout(@—10°)}/20 [mV/°] Sensitivity error is definited as: sensitivity error =(actual sensitivity - nominal sensitivity)/ nominal sensitivityX 100%, nominal sensitivity (100mV/°) Remarks3: when the sensor work,make sure it is in the allowable supply range,and 12V is introduced. V. Input and output feature: 1. When the power off, the output is 0V. 2. When...

Open the catalog to page 2

ZCT115J-SQQ-80 Horizontal mounted Tilt Sensor voltage output-3

VIII. Inastall diagram: IX.Order information： Specifications subject to change without notice! Shanghai Zhichuan Electronic Tech Co.,Ltd ADD：3/F,1128 Denghui Rd., Minhang district, Shanghai, 201109,China. TEL：+86-021-64908096 E-mail: [email protected] Http://www.zc-sensor.com

Open the catalog to page 3