ZCT‐IPI‐DC0x Datalogger Specifications 1. General Information Developed by Shanghai Zhichuan Electronic Tech Co., Ltd., ZCT‐IPI‐ DC0x is a compact datalogger for data collection from Zhichuan’s ZCT‐ CX100, ‐CX200 a n d ‐ C X 3 0 0 in‐ place inclinometer (IPI) strings. The datalogger has two RS‐485 input channels and should, together with one or two IPI strings, be powered by a 10~30VDC PSU or battery. There is a s l o t o n t h e h o u s i n g f o r MicroSD c a r d , i n w h i c h data c a n b e t e m p o r a r i l y stored or backed up. In case of DC01 (the wireless version), one internal DTU...

1 x RS‐485 output channel, wired networking of up to 32 dataloggers (DC02) 〒 Others 8G MicroSD card Size: 95*30*130mm Working temperature: ‐20℃ ~ +60℃ 4. Communication 4.1 Communication and application configuration 4.1.1 Communication configuration This shall be done only for the DC01 version. Connect PIN13 and PIN14 to the PC via a 485‐USB converter, use DTUConfig.exe to configure the DTU module inside the datalogger, then complete port mapping at the user’s router. Please re

Wirele data transmissio is a so ess on olution ba ased on p public mo obile comm municatio on platfor rm and the Internet t. As long as there are mobil le network signals o on site an nd network service es are ope ened, field d devices can be m managed and data c collected i in obal enviro onment w with Intern net access s. any glo The se erver side needs to have a fix xed IP address. Dyn namic dom main nam me or third d‐ party IP forward ding servic ce can also o be used. . 4.2.2 W Wired netw working Differe addresses can be assigned to the datalogg ent gers so a m measuring system is g built...

installation‐free. The software can display and save the data sent by the datalogger in real time, and can also load the files stored in the SD card of the datalogger. The software can be used to assign the IPI probes in the borehole, so as to collect the data accurately. 5.2 Notes on opertion 5.2.1 Collecting data The software, working as the server, will automatically receive data sent by the datalogger, when the port mapping is set up. 5.2.2 Saving data Tick Autosave, and the software will automatically save data in txt format. Or, data can be manually saved by using the File\Save command...

“Setting\collector parameter” is where we can configure the datalogger. Note: when the window is open, the software can still receive data from the datalogger. Through this user interface, first wireless communication will trigger data collection. It can also be used to assign IPI probes in the borehole and to set the time interval of data acquisitions. Configuration information can be saved in ini format and be re‐loaded at a later time. (Note: The interface of the wired version is slightly different from the wireless version above. The wired version is based on serial port for communication,...