Catalogs >
Shanghai Zhichuan Electronic Tech Co., Ltd >
ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display
8Pages

Catalog excerpts

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 1

Shanghai Zhichuan Electronic Tech Co., Ltd. General description ZCT-CX05-RC01 inclinometer system is designed and produced by ZC Tech. It is with measuring range of +-20°, and made of sensor and display. It is with zero set, alarm angle set function, and the built-in clock chip realize the system log function which can be set and read by the connection PC and USB interface.It can be used as safety monitoring record for construction machines. Technical Parameters 1 Parameter Quiescent current(1 Alarm current Operation parameter Alarm angle Work temprange Measuringrange Specification parameter Entirely industrial device; Stable and reliable performance; Automatically log function; Wide power supply and power reversion protection. sensor sensor Application Engineering vehicle inclination measure and record, Aerial lifts safety

Open the catalog to page 1

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 2

Remark 1: Quiescent refers to work current when power supply is DC24Vol and sensor's angle is less than alarm angle. Remark 2: accuracy refers to RMS value between actual angle and measuring angle (>16 times) . EMC (electromagnetic compatibility) measure and test (1) Connect the display with PC by the USB interface, and run the software to set the following parameters: 1. System time, default is Beijing time and time can be detailed as seconds 2. Alarm angle, default is +-7°. Current angle and time will be saved when it reaches or be greater than the alarm angle 3. Sleep time, default is...

Open the catalog to page 2

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 3

(2) Log function The following events will be saved in the system 1. Sensor enter into sleep state, event type: Sleep is showed by software 2. Sensor recover from sleep state, event type code: Wake is showed by software 3.The measured angle is reach or exceed set alarm angle, event type: Angle_Alarm is showed 4. Angle alarm is released(measured angle is less than the set alarm angle), event type Angle_Recover is showed 5. Detect limit alarm, event type: Limit_Alarm is showed by software 6. Release limit alarm, event type: Limit_Recover is showed by software 7. Sensor is not connect with...

Open the catalog to page 3

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 4

Shanghai Zhichuan Electronic Tech Co., Ltd. 3. Real angle is showed on the half second row, which is made of sign and numbers. Default: left inclination is with negative angle and right inclination is with positive angle 4. When inclination angle is less than 2°, three upward arrows is showed on the left bottom of the screen and beeper is not aloud. If inclination angle is in the range of 2°and the alarm angle, when in left inclination state, there is a left toward arrow and three upward arrows; when in right inclination state, there is a right inclination arrow and three upward arrows. The...

Open the catalog to page 4

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 5

It is not necessary to recognize wire colors for the sensor, when the connectors are matched, it is OK. NOTICE: 1. There are 4 wires of the power cable, that is brown wire, black wire, gray wire, yellow and green wire. Power + connect with brown wire, and Power- connect with black wire. Gray and yellow green wires are couple switch input signal( the couple wires are with two state: connection state and not connection state. If connection, display can detect and give alarm signal; if not connection, it is viewed as default normal state. ) The two wires can't receive input, or the sensor will...

Open the catalog to page 5

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 6

Shanghai Zhichuan Electronic Tech Co., Ltd. -20° Sensor's installation diagram Display's diagram

Open the catalog to page 6

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 7

Shanghai Zhichuan Electronic Tech Co., Ltd. Sensor The cable is 0.2m The connection of M12 connector Connection diagram The cable is 15m The connection of M12 connector The cable is 10m The cable is 3m Power and switch

Open the catalog to page 7

ZC ZCT-CX05-RC01 One Axis Inclinometer for Truck Tip-over Monitoring with Alarm and Display - 8

Shanghai Zhichuan Product Name: Portable Inclinometer Data of purchasing: Time limit of Guaranteeing: Company Purchasing: Product SN: Record of mending: • Report Time; • Reasons of fault: • Reporter: • Results of mending: Information of customer holding this Guarantee Card: Note: This card is the basis for user enjoying maintaining and upgrades service. Shanghai Zhichuan Electronic Tech Co., Ltd. Address: 3/F Compositive Building, No.1128 Denghui RD, Minhang Shanghai, China 0086-21-64908093 64908096 (T) 0086-21-64906992 (F) Postcode:201109 http://www.zc-sensor.com E-mail:sales@zc-sensor.com

Open the catalog to page 8