ZHYQ PT124G-122T oil filled flexible melt pressure transmitter

Product catalog summary

Overview: The PT124G-122T Series Melt Pressure Transducer is designed for applications requiring precise pressure and temperature measurements. It is filled with environmentally safe silicon oil, ensuring no harm if the diaphragm is damaged. This transducer is suitable for use in medicine, food processing, and environmental monitoring.

Applications:

Chemical fiber equipment
Plastic and rubber manufacturing
Medicine and food processing
Drinking water environmental monitoring
General pressure measurement and control

Features:

Stainless steel construction
Easy installation
Adjustable zero and span
Optional amplified signals
Internal 80% shunt calibration
High stability and anti-jamming capability
Simultaneous pressure and temperature measurement

Specifications:

Pressure Range: 0 to 150 MPa
Output: 2mV/V or 3.33mV/V
Accuracy: ±0.5%FS or ±1%FS
Excitation: 10 VDC
Repeatability: ±0.2% FSO
Construction: Wheatstone bridge
Overload Pressure: 1.5×FSO
Insulation Resistance: 200 Megohms @100Vdc
Max Operating Temperature: 0 to 250℃
Electrical Connector: 5PIN or 6PIN
Thermocouple Types: J, K, E, PT100

Installation and Operation:

Ensure correct machining of the mounting hole before installation.
Use an aluminum gasket for installation.
Remove transducers only when the polymer is molten.
Keep the electronic housing at room temperature to ensure accuracy and longevity.
Avoid prolonged overload to maintain accuracy and lifespan.
Use shielded cables and ground at one end to prevent interference.

Wiring Instructions:

5PIN and 6PIN configurations are available for different output functions.
Color-coded wiring diagrams are provided for proper connection.

Catalog excerpts

ZHYQ PT124G-122T oil filled flexible melt pressure transmitter-1

Melt Pressure Transmitter Model：PT124G-122T（oil filled） Description PT124G-122T Series Melt Pressure Transducer（Steel stem & Sanitary）, filled with environmental, avirulent medium silicon oil. If the melt pressure sensor diaphragm damaged during process, the leaking medium is no harm to the human body or ambient . it can achieve the pressure and temperature measuring in one point , and has the wide application in Medicine & Food process equipment，drinking water environmental monitoring. with the advantage of precision and reliable pressure measuring and high-standard quality. Application      Chemical fiber Equipment Plastic and Rubber manufacturing equipment Medicine & Food process equipment , Drinking water environmental monitoring occasion Other pressure measurement and Control Stainless steel welding Easy to install Zero and span adjustable Various amplified signals optional Internal 80% shunt calibration Good stability and anti-jamming capability Excellent stability and repetition Can measure the pressure and temperature in one point ZHYQ Sensor & Control

Open the catalog to page 1

ZHYQ PT124G-122T oil filled flexible melt pressure transmitter-2

Melt Pressure Transmitter Specification Range: Output: Accuracy: Excitation: Repeatability: Construction: Bridge resistance: Overload pressure: Internal shunt calibration: Insulation Resistance: Standard wetted Parts Mounting Torque Max. operating Temp: Electronic operating temperature: Electric connector: Rigid Length: Flexible Length: Thermocouple type: Process connector: Mounting Hole 45° Slope Sealed Ordering Guide Model Rigid & flexible length (inch) Screw Thread Electric connection

Open the catalog to page 2

ZHYQ PT124G-122T oil filled flexible melt pressure transmitter-3

Operating instruction Attention for installation 1, Installation Do not remove protective cap until ready to install. Prior to initial installation, verify correct machining of mounting hole. Install with aluminum gasket. The electronics housing should be secured, with the enclosed mounting bracket. 2, Remove Make sure that there is no remained metal or plastic; remove all of the transducers from the equipment before you clean the extruder. You can remove the transducer only when the polymer is molten. And clean the diaphragm of the transducer with soft cloth as soon as you remove it. At the...

Open the catalog to page 3

ZHYQ PT124G-122T oil filled flexible melt pressure transmitter-4

Melt pressure transmitter Wiring diagram Output Calibration Output Calibration Output Shanghai Zhaohui Pressure Apparatus Co., Ltd 5-6F No.8 Building No.115 ,Lane 1276 Nanle Road Songjiang District Shanghai 201600 China Tel:+86-21-51691919 67755189 Fax:+86-21-67755185 E-mail: [email protected] www.zhyqsensor.com ZHYQ sensor & control

Open the catalog to page 4