Melt Pressure Transducer Model：PT124G-112T（Rigid High precision） Description PT124G-112T Series Melt Pressure Transducer（rigid stem & High accuracy ）. It is with thermocouple, can measure the pressure and temperature in one point. This model adopts special construction and excellent alloy elastic membrane to reduce the thermal draft ,improve the accuracy, good anti-jamming performance andt built in 80% shunt calibration, it can match our N series pressure instrument also can match the pressure instrument or controller of other brand . It is suitable for pressure measuring and controlling in melt fluid medium, such as the plastic & polymer in the process equipments. Can replace Dynisco / Gefran /GP50 etc. international brand absolutely . Application     Fiber Equipment Plastic and Rubber manufacturing equipment Chemical fiber, polyester process equipment Other melt pressure measurement and Control High accuracy Stainless steel welding Easy to install Internal 80% calibration Excellent stability and repeatability can measure the pressure and temperature in one point

Melt Pressure Transducer Specification Pressure range: Output: Input voltage: Accuracy: Repeatability: Construction: Bridge resistance: Overload pressure: Internal shunt calibration: Insulation Resistance: Standard wetted Parts Mounting Torque Max. Diaphragm Temp: Electronic operating temperature: Electric connector: Rigid Length Thermocouple type: Process connector: Mounting hole 45° Slope Sealed Ordering Guide Model Rigid length (inch) Screw Thread Electric connection Thermo Type

Operating instruction Attention for installation 1, Installation Do not remove protective cap until ready to install. Prior to initial installation, verify correct machining of mounting hole. Install with aluminum gasket. The electronics housing should be secured, with the enclosed mounting bracket. 2, Remove Make sure that there is no remained metal or plastic; remove all of the transducers from the equipment before you clean the extruder. You can remove the transducer only when the polymer is molten. And clean the diaphragm of the transducer with soft cloth as soon as you remove it. At the...

Melt pressure transducer Shanghai Zhaohui Pressure Apparatus Co., Ltd 5-6F No.8 Building No.115 ,Lane 1276 Nanle Road Songjiang District Shanghai 201600 China E-mail: [email protected] /w\ QicC