ZHYQ PT124B-122T fleixble melt pressure transmitter for sanitary pressure measurement

Product catalog summary

Description
The PT124B-122T Series Melt Pressure Transducer is designed for applications requiring pressure and temperature measurement in a single point. It is filled with environmentally friendly, non-toxic silicon oil, ensuring safety in case of diaphragm damage. This transducer is suitable for use in medicine, food processing, and environmental monitoring, offering precision and reliability.

Applications

Chemical fiber equipment
Plastic and rubber manufacturing equipment
Medicine and food processing equipment
Drinking water environmental monitoring
General pressure measurement and control

Features

Stainless steel construction
Easy installation
Adjustable zero and span
Various amplified signal options
Internal 80% shunt calibration
Good stability and anti-jamming capability
Simultaneous pressure and temperature measurement

Specifications

Pressure range: 0 to 150 MPa
Output: 0-5V, 0-10V, 4-20mA
Accuracy: ±0.5%FS or ±1%FS
Excitation: 24V DC (12-36V)
Repeatability: ±0.2% FSO
Construction: Wheatstone bridge
Overload pressure: 1.5×FSO
Insulation resistance: 200 Megohms @100Vdc
Max operating temperature: 0-250℃
Electronic operating temperature: -25℃ to 85℃
Thermocouple types: J, K, E, PT100

Installation and Operation

Ensure correct machining of the mounting hole before installation. Use an aluminum gasket and secure the electronics housing with the provided bracket.
Remove transducers only when the polymer is molten and clean the diaphragm immediately after removal.
Allow sufficient soak time for the transducer tip to reach operating temperature before starting the process.
Keep the electrical housing at room temperature to maintain accuracy and prolong the transducer's life.
Avoid prolonged overload pressure to prevent accuracy degradation and reduced lifespan.
Use shielded cables and ground the cable shield at one end to prevent interference.

Wiring Diagram
The document provides detailed wiring diagrams for 5PIN and 6PIN configurations, specifying color codes for signal and excitation connections.

Catalog excerpts

ZHYQ PT124B-122T fleixble melt pressure transmitter for sanitary pressure measurement-1

Melt Pressure Transmitter Model：PT124B-122T（oil filled） Description PT124B-122T Series Melt Pressure Transducer（Steel stem & Sanitary）, filled with environmental, avirulent medium silicon oil. If the melt pressure sensor diaphragm damaged during process, the leaking medium is no harm to the human body or ambient . it can achieve the pressure and temperature measuring in one point , and has the wide application in Medicine & Food process equipment，drinking water environmental monitoring. with the advantage of precision and reliable pressure measuring and high-standard quality. Application      Chemical fiber Equipment Plastic and Rubber manufacturing equipment Medicine & Food process equipment , Drinking water environmental monitoring occasion Other pressure measurement and Control Stainless steel welding Easy to install Zero and span adjustable Various amplified signals optional Internal 80% shunt calibration Good stability and anti-jamming capability Excellent stability and repetition Can measure the pressure and temperature in one point ZHYQ Sensor & Control

Open the catalog to page 1

ZHYQ PT124B-122T fleixble melt pressure transmitter for sanitary pressure measurement-2

Melt Pressure Transmitter Specification Range: Output: Accuracy: Excitation: Repeatability: Construction: Bridge resistance: Overload pressure: Internal shunt calibration: Insulation Resistance: Standard wetted Parts Mounting Torque Max. operating Temp: Electronic operating temperature: Electric connector: Rigid Length: Flexible Length: Thermocouple type: Process connector: Mounting Hole 45° Slope Sealed Ordering Guide Model Rigid & flexible length (inch) Screw Thread Electric connection

Open the catalog to page 2

ZHYQ PT124B-122T fleixble melt pressure transmitter for sanitary pressure measurement-3

Operating instruction Attention for installation 1, Installation Do not remove protective cap until ready to install. Prior to initial installation, verify correct machining of mounting hole. Install with aluminum gasket. The electronics housing should be secured, with the enclosed mounting bracket. 2, Remove Make sure that there is no remained metal or plastic; remove all of the transducers from the equipment before you clean the extruder. You can remove the transducer only when the polymer is molten. And clean the diaphragm of the transducer with soft cloth as soon as you remove it. At the...

Open the catalog to page 3

ZHYQ PT124B-122T fleixble melt pressure transmitter for sanitary pressure measurement-4

Melt pressure transmitter Wiring diagram Output Calibration Output Calibration Output Shanghai Zhaohui Pressure Apparatus Co., Ltd 5-6F No.8 Building No.115 ,Lane 1276 Nanle Road Songjiang District Shanghai 201600 China Tel:+86-21-51691919 67755189 Fax:+86-21-67755185 E-mail: [email protected] www.zhyqsensor.com ZHYQ sensor & control

Open the catalog to page 4