ZHYQ PT124B-113 rigid melt pressure transmitter for sanitary pressure measurement

Product catalog summary

Overview: The PT124B-113 Series Melt Pressure Transducer is designed for use in medicine and food processing equipment. It is filled with non-toxic silicon oil, ensuring safety in case of diaphragm damage. The transducer offers high precision, reliability, and internal calibration capabilities.

Applications:

Chemical fiber equipment
Plastic and rubber manufacturing equipment
Medicine and food processing equipment
General pressure measurement and control

Features:

High-standard quality with stainless steel welding
Simple installation and use of non-toxic materials
80% internal calibration for enhanced accuracy
Excellent stability and repeatability

Specifications:

Pressure range: 0 to 150 MPa
Output options: 0-5V, 0-10V, 4-20mA
Input voltage: 12-36V DC
Accuracy: ±1.0%FS to ±1.5%FS
Repeatability: ±0.2% FSO
Construction: Wheatstone bridge with 345 Ohms minimum input resistance
Overload pressure: 1.5 times FSO
Max operating temperature: 0 to 260°C
Electrical connector options: 5PIN, 6PIN

Installation and Maintenance:

Ensure correct machining of mounting hole before installation
Use aluminum gasket for installation
Remove transducer only when polymer is molten
Keep electrical housing below 80°C for optimal performance
Use shielded cable for wiring to prevent interference

Wiring Instructions:

5PIN and 6PIN configurations available for different output functions
Color-coded wiring for signal and excitation connections

Catalog excerpts

ZHYQ PT124B-113 rigid melt pressure transmitter for sanitary pressure measurement-1

Melt Pressure Transmitter Model：PT124B-113 (oil filled) Description PT124B-113 Series Melt Pressure Transducer rigid stem & sanitary） filled with environmental, avirulent （ , medium silicon oil, can be widely used in Medicine & Food process equipment , If the melt pressure sensor diaphragm damaged during process, the leaking medium is no harm to the human body or ambient . Zero & span can be adjustable; with amplified signal can be connected with PLC. It has the advantages of high precision and reliable, good quality, internal 80% calibration. Application     Chemical fiber Equipment Plastic and Rubber manufacturing equipment Medicine & Food process equipment, etc Other pressure measure and control High-standard quality Stainless steel welding Simple installation Adopt environmental and non-toxic material 80% internal calibration Excellent stability and repeatability ZHYQ Sensor & Control

Open the catalog to page 1

ZHYQ PT124B-113 rigid melt pressure transmitter for sanitary pressure measurement-2

Melt Pressure Transmitter Specification Pressure range: Output: Input voltage: Accuracy: Repeatability: Construction: Bridge resistance: Overload pressure: Internal shunt calibration: Insulation Resistance: Standard wetted Parts Mounting Torque Max. Operating Temp: Electronic operating temperature: Electric connector: Rigid Length Process connector: Mounting hole 45° Slope Sealed Ordering Guide Model Rigid length (inch) Screw Thread Electric connection

Open the catalog to page 2

ZHYQ PT124B-113 rigid melt pressure transmitter for sanitary pressure measurement-3

Operating instruction Attention for installation 1, Installation Do not remove protective cap until ready to install. Prior to initial installation, verify correct machining of mounting hole. Install with aluminum gasket. The electronics housing should be secured, with the enclosed mounting bracket. 2, Remove Make sure that there is no remained metal or plastic; remove all of the transducers from the equipment before you clean the extruder. You can remove the transducer only when the polymer is molten. And clean the diaphragm of the transducer with soft cloth as soon as you remove it. At the...

Open the catalog to page 3

ZHYQ PT124B-113 rigid melt pressure transmitter for sanitary pressure measurement-4

Melt pressure transmitter Wiring diagram Output Calibration Output Calibration Output Shanghai Zhaohui Pressure Apparatus Co., Ltd 5-6F No.8 Building No.115 ,Lane 1276 Nanle Road Songjiang District Shanghai 201600 China Tel:+86-21-51691919 67755189 Fax:+86-21-67755185 E-mail: [email protected] www.zhyqsensor.com ZHYQ sensor & control

Open the catalog to page 4