- Catalogs
- Shanghai Zhaohui Pressure Apparatus Co.,Ltd.(ZHYQ)
- ZHYQ Melt pressure transducer PT124G-128 plastic extruder
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
ZHYQ Melt pressure transducer PT124G-128 plastic extruder
ZHYQ Melt pressure transducer PT124G-128 plastic extruder
- Chemical fiber and spinning equipment
- Polyester equipment
- General pressure measurement and control
- High-standard quality with accuracy better than ±0.5%
- Stainless steel wetted parts
- Internal 80% Shunt Calibration
- Good stability and repeatability
- Exposed, bendable capillary
- Pressure Range: 0 to 150 MPa (0 to 20000 psi)
- Output: 2mV/V; 3.33mV/V
- Accuracy: ±0.5%FS
- Input Voltage: 10VDC
- Repeatability: ±0.2%
- Construction: Wheatstone bridge with 350 ohms resistance
- Overload Pressure: 1.5×FSO
- Max Diaphragm Temperature: 0 to 350℃
- Electric Connector: 5PIN, 6PIN
- Process Connector: 1/2″-20UNF, M14×1.5, M18×1.5
- Ensure correct machining of the mounting hole and use an aluminum gasket for installation.
- Remove transducers before cleaning the extruder and clean the diaphragm with a soft cloth.
- Allow sufficient soak time for the transducer tip to reach operating temperature before starting the process.
- Keep the electrical housing at room temperature to maintain accuracy and prolong the transducer's life.
- Avoid prolonged overload pressure to prevent accuracy degradation.
- Use shielded cables and ground the cable shield at one end to prevent interference.
- 5PIN and 6PIN configurations are available for different output functions, including 0-5V, 1-5V, 0-10V, and 4-20mA.
- Color-coded wiring diagrams are provided for each pin configuration.
Catalog excerpts
Melt Pressure Transducer Model: PT124G-128 ( space restricted) Description PT124G-128 Series melt pressure transducer is ideal for space restricted areas applications required, where mounting space is limited. It also has a free-spinning jam nut that simplifies installation. The series comes equipped with six or eight pin bendix connector. It can be interchangeable with the similar world standard products. It is suitable to measure and control the melt pressure in chemical fiber equipment, rubber and plastic machine and so on. Application Chemical fiber& spinning Equipment Polyester equipment Other pressure measurement and control Feature High-standard quality Accuracy better than ± 0.5% Stainless steel wetted parts Internal 80% Shunt Calibration Good stability and repeatability Exposed, bendable capillary Dimension ZHYQ Sensor & Cont
Open the catalog to page 1
Ordering Guide Shanghai Zhaohui Pressure Apparatus Co., Ltd Page 2 of 4 5-6F No.8 Building No.115 ,Lane 1276 Nanle Road Songjiang District Shanghai 201600 China Tel:+86-21-51691919 67755189 Fax:+86-21-67755185 E-mail: [email protected] A cnsi ZHYQ Sensor & Control
Open the catalog to page 2
Melt pressure transducer/transmitter Operating instruction Attention for installation 1, Installation Do not remove protective cap until ready to install. Prior to initial installation, verify correct machining of mounting hole. Install with aluminum gasket. The electronics housing should be secured, with the enclosed mounting bracket. 2, Remove Make sure that there is no remained metal or plastic; remove all of the transducers from the equipment before you clean the extruder. You can remove the transducer only when the polymer is molten. And clean the diaphragm of the transducer with soft cloth...
Open the catalog to page 3
Wiring diagram Shanghai Zhaohui Pressure Apparatus Co., Ltd 5-6F No.8 Building No.115 ,Lane 1276 Nanle Road Songjiang District Shanghai 201600 China Tel:+86-21-51691919 67755189 Fax:+86-21-67755185 E-mail: [email protected] www.zhyqsensor.com C€ ZHYQ sensor & control
Open the catalog to page 4All Shanghai Zhaohui Pressure Apparatus Co.,Ltd.(ZHYQ) catalogs and technical brochures
Bolt Burst Plug1 Page
SIL Certificate1 Page
ROHS Certificate1 Page
CE Certificate1 Page
ISO Certificate1 Page
ATEX certificate1 Page
Archived catalogs
- Flowmeter
- Temperature probe
- Volume flow monitor
- Liquid flow monitor
- Resistance temperature sensor
- Pressure transmitter
- Pressure gauge
- Level limit switch
- Analog pressure transmitter
- Liquid level detector
- Waterproof flow meter
- Gas flow monitor
- Level probe
- Stainless steel flow monitor
- Liquid level sensor
- Digital indicator
- Industrial flow monitor
- Analog pressure gauge
- Pressure probe
- Precision flow meter