Catalog excerpts
’fMzHYO Description PT124G-3200 is OEM differential pressure sensor with stainless steel isolated diaphragm. It has integrated construction, high static pressure, high stability and good reliability. The high and low pressure sides are protected by isolated diaphragm. It can be used for measuring corrosive and conductive fluid media. The measured differential pressure is transmitted onto the die through the diaphragm and filling silicon oil so that the sensor could measure differential pressure precisely. The pressure sensor is tested automatically and compensated zero and temperature performance with provided resistors. The installation dimension is consistent with general products which makes the sensor has a good interchangeability. It is widely used for industrial process control and differential pressure measure fields, etc. Features Pressure range: 0kPa~35kPa...3.5MPa Constant current/ Constant Voltage power supply Isolated construction, possible to various fluid media OEM differential pressure sensor 316L stainless steel High static pressure 20MPa 1.5 times overpressure Application Industrial process control Differential pressure measurement Gas, liquid pressure measure Pressure checking meter Pressure calibrator Eddy-current flow meter Dimensions Wire Lead Color Note: The actual out profile and electric connection method, please check the parameter label enclosed with products. ZHYQ Sensor & Control Page 1 of 3
Open the catalog to page 1
OEM Piezoresistive Differential Pressure Sensor Basic Specification: Electric Performance Power supply: <2.0mA DC;<10V DC Electric connection: 100mm silicon rubber flexible wires Common mode voltage input: 50% of input (typ.) Input impedance: 3kQ-8kQ Output impedance: 3.5kQ-6kQ Response (10%-90%): <1ms Insulation resistor: 100MQ, 100VDC Overpressure: refer to Order Guide Max. Static pressure: 20MPa Zero drift/static pressure: <0.5mV/MPa Construction Performance Diaphragm: stainless steel 316L Housing: stainless steel 316L Pin: silicon rubber flexible wire O-ring: Viton Net weight:...
Open the catalog to page 2
OEM Piezoresistive Differential Pressure SensorOrder Guide PT124G-3200 OEM Piezoresistive Differential Pressure Sensor I.Please notice that one side of the leading wire is High Pressure Side, the other is Low Pressure Side. Or identify High Pressure Side by mark “+”, and identify Low Pressure Side by mark “-“ carefully; 2.During application, please pay attention that the pressure of high pressure side should be higher than that of low pressure side; 3.Please pay attention to protect the diaphragm, prevent it from damaging; 4.Please do not pull or drag the 6 leading wires; 5.Temperature...
Open the catalog to page 3All Shanghai Zhaohui Pressure Apparatus Co. catalogs and technical brochures
-
Bolt Burst Plug1 Pages
-
SIL Certificate1 Pages
-
ROHS Certificate1 Pages
-
CE Certificate1 Pages
-
ISO Certificate1 Pages
-
ATEX certificate1 Pages
