WTS High Sensitivity V117E Mono-axial

1 / 1 PageView full catalog

WTS High Sensitivity V117E Mono-axial

Product catalog summary

Performance Specifications:

Sensitivity: 1000 mV/g
Measuring Range: 5 g peak
Frequency Range (±5%): 0.5 to 1 kHz
Frequency Range (+10%): 0.3 to 2 kHz
Resonance Frequency: >8 kHz
Non-linearity: <1%
Transverse Sensitivity: =5%
Resolution Ratio: 0.00001 g rms

Environmental Characteristics:

Overload Limit: 1509 g peak
Temperature Range: -65 to +250°F (-54 to +121°C)

Electrical Characteristics:

Excitation Voltage: 18 to 28 VDC
Excitation Current: 2 to 10 mA (recommended 4 mA)
Bias Voltage: 1 MVE 1.5 V
Electrical Isolation: Yes
Output Polarity: Positive

Physical Characteristics:

Sensing Geometry: Ceramic shear
Structure Mode: Shear
Housing Material: Titanium
Sealing Mode: Laser welding
Dimensions: 1.30 in x 2.29 in (33 mm x 58 mm)
Weight: 7.06 oz (200 g)
Electrical Connector: 2 core MIL-C-5015
Electrical Connection Location: Top
Mounting: M6 screw hole

Typical Frequency Response:

The frequency response graph indicates the accelerometer's performance across a range of frequencies, showing stability and accuracy within the specified frequency ranges.

Notes:

The low-frequency response is determined by the external signal conditioner.
Excitation voltage is supplied by a two-wire constant current source, recommended at 24V.

Catalog excerpts

PERFORMANCE sensitivity (±10%) measuring range frequency range(±5%) [2] frequency range(± 10%) [2] resonance frequency [1] non linearity [3] tansverse sensitivity resolution ratio Environmental character overload limit temperature range Electrical character excitation voltage [4] excitation current [5] bias voltage [1] electrical isolation output polarity [1] physical character sensing geometry stucture mode housing material sealing mode dimension weight [1] electrical connector electrical connection location mounting ENGLISH lOOOmV/g ±5 g pk 0.5~1k Hz 0.3~2k HZ >8K <1% <5% 0.00001 g rms ±150g pk -65~+250’ F +18-+28VDC 2-10 mA 11V±1.5V isolation positive ceramic shear titanium laser welding 01.30 in x 2.29 in 7.06oz 2 core MIL-C-5015 top M6 screw hole NOTE: [1] Inherent characteristics [2] The low frequency response is determined by the external signal conditioner [3] least square method [4] two-wire constant current incentive source power supply,recommened 24V. [5] excitation current recommened 4mA. DRAWING:

Open the catalog to page 1

All Shanghai WTS Technology Co.,Ltd catalogs and technical brochures

Archived catalogs

S112C
1 Page