Vigor SSA100 Vibration Sensor

Product catalog summary

Overview: The SSA100 Vibration Sensor is designed for real-time vibration analysis, providing single, double, or three-axis vibration frequency and acceleration data. It outputs data via multiple interfaces such as RS232, RS485, RS422, CAN2.0, CANopen, and Ethernet, eliminating the need for expensive data acquisition equipment.

Key Features:

Built-in real-time FFT analysis for amplitude and frequency data output.
MEMS acceleration sensor with optional axis configurations.
Maximum acceleration range of ±16g and vibration frequency range of 0~1.0kHz.
Cross-axis sensitivity options ranging from ≤ ±1.5%FS to ≤ ±0.1%FS.
Non-linearity of ≤ 0.5%FS and customizable alarm thresholds for acceleration or vibration frequency.
Includes high pass filter, with optional low pass or bandpass filters.

Applications: The sensor is suitable for various fields including engineering machinery, radar/antenna motion monitoring, shipping, railway transportation, scientific research, automobile, factory automation, and civil engineering.

Performance Specifications:

Acceleration measurement ranges from ±1g to ±16g with resolutions from 0.1mg to 2mg.
Vibration frequency measurement range is 0~1000Hz with accuracy of <±5% and resolution of 0.1Hz.
Adjustable digital filters and a refresh rate of 50~400Hz.
Operates within a temperature range of -40 to 85°C and has an IP67 protection rating.

Technical Details:

Power supply requirement is 24±5VDC with ≤200mA current.
EMC compliance according to GBT17626 and insulation resistance of ≥100MΩ.
Shock resistance of 1500g@1ms and vibration resistance of 4grms, 20~2000Hz.
Dimensions and weight specifications are provided, with a connection via an M12-8Pin socket.

Ordering Information: The sensor can be customized based on axis configuration, range, output interface, and cross-axis sensitivity.

Contact Information: Shanghai Vigor Technology Development Co., Ltd. provides contact details for further inquiries.

Catalog excerpts

Vigor Technology

Open the catalog to page 1

SSA100 Vibration Sensor Features - Real-time FFT analysis inside, output amplitude and frequency data - MEMS acceleration sensor, single / double / three axis optional - Max acceleration range ±16g, vibration frequency range 0~1.0kHz - Cross-axis sensitivity ≤ ±1.5%FS, optional ±1%FS, ±0.5%FS, ±0.1%FS - Non-linearity ≤ 0.5%FS - Acceleration or vibration frequency alarm threshold can be set - Built in high pass filter, optional low pass filter or bandpass filter Descriptions SSA100, built in on-line FFT analysis, directly outputs single/double/three axis vibration frequency and acceleration data...

Open the catalog to page 2

Wiring Table 2 Pin definition Pin Signal GND Signal GND Signal GND 6 Picture2 M12 connector socket (View from outside) Single — 1 Double — 2 Three — 3 Cross-axis sensitivity

Open the catalog to page 4

Shanghai Vigor Technology Development Co., Ltd. Tel:021-58404921 Fax:021- 58354552 Website：www.vigordigital.com A d d r e s s ： Ro o m 1 0 2 , B l o c k 4 , N o . 2 8 9 o f B i s h e n g Ro a d , S h a n g h a i , C h i n

Open the catalog to page 5

Vigor SSA100 Vibration Sensor

Vigor SSA100 Vibration Sensor

Catalog excerpts

All Shanghai Vigor Technology Development Co., Ltd. catalogs and technical brochures