AS330 Escalator Integrated Controller

1 / 2 PagesView full catalog

AS330 Escalator Integrated Controller

Product catalog summary

Main Features

Integration of escalator control and drive systems.
Utilizes dual 32-bit embedded microcontrollers for escalator operation and motor drive control.
Features redundant safety design with dual safety protection from control and drive processors.
Anti-jamming design surpasses industrial standards.
Employs sixth-generation hardware module with high junction temperature resistance (up to 175°C) for reduced switching loss and extended service life.
CAN communication used for up and down safety chain fault acquisition boards to minimize cabling.
Equipped with CAN communication fault display boards.

Specification Data

Rated capacities and outputs vary across models, with maximum output voltages reaching 1400V.
Supports three-phase input power supply with voltage range of 380/400/415/440/460V and frequency of 50/60Hz.
Handles voltage fluctuations with a range of -15% to +10%.
Basic running speed is less than 0.7m/s, with CAN Bus serial communication mode.
Frequency control range from 0 to 120Hz, with overload capacity up to 200% depending on frequency.
Braking torque supported with external brake resistor and built-in brake unit.
Operational temperature range from -10°C to +45°C, with humidity below 95% RH.
Designed for indoor use below 1000m altitude, with IP20 protection grade and forced air cooling.

Installation Information

Installation dimensions and specifications vary by model, with specific mounting requirements detailed for each.

Catalog excerpts

Integrated Controller AS330 Escalator Integrated Controller Main Features ® Organic combination of the escalator control and drive, ®@ Dual 32-bit embedded microcontroller processor to jointly complete the escalator operation and motor drive control e@ Redundant safety design and double safety protection by control processor and drive processor, to realize the strongest safety protection to the escalator running @ Anti-jamming design exceeds the highest level of industrial design requirements @ The sixth generation new module is used for hardware, and the resistance to junction temperature can reach 175°C, making the switching loss lower and the service life longer @ Up and down safety chain fault acquisition boards adopt CAN communication to save cables @ Equipped with CAN communication fault display boards

Open the catalog to page 1

Rated capacity Specification Data Technical Indicators 4TO5P5 voltage Number of phases, voltage, and Input power supply frequency Voltage range 1400V-level: three phase 380/400/415/440/460V 400V-level: three phase 380/400/415/440/460V. Frequency range Control features Instantaneous voltage drop Basic characteristics 400V-level: input voltage < AC300V, low-voltage protection after 15 ms running running speed © Communication mode Starting torque Frequency control range Qverload capacity Braking torque Acceleration and deceleration time Ambient temperature Humidity Environment —_ Preservation temperature...

Open the catalog to page 2