Installation Dimensions and Motor Parameters

This section outlines the key specifications and physical dimensions for the M-80AIS Series low-voltage servo motor.

Motor Specifications

• Motor Model: Specific model identification within the M-80AIS Series.
• Rated Power (W): The continuous power output the motor is designed to deliver.
• Rated Current (A): The current the motor draws under rated load conditions.
• Rated Voltage (V): The operating voltage for the motor.
• Rated Speed (rpm): The standard operating rotational speed.
• Maximum Speed (rpm): The highest permissible rotational speed.
• Rated Torque (N·m): The torque output under rated conditions.
• Instantaneous Maximum Torque (N·m): The peak torque the motor can deliver momentarily.
• Instantaneous Maximum Current (A): The peak current the motor can draw momentarily.
• Rotor Pole Pairs: Number of magnetic pole pairs in the rotor, affecting motor characteristics.
• Moment of Inertia (10⁻⁴ kg·m²): The rotor's resistance to angular acceleration.
• Motor Weight (kg): The mass of the motor.

Physical Dimensions

• Motor Length (L, mm): The axial length of the motor body.
• Motor Length + Axial Length: Total length including any axial extensions.

Additional Notes

Values provided in parentheses correspond to motors equipped with a holding brake. It is important to note that the holding brake is intended for holding position and not for dynamic braking.

Summary

The M-80AIS Series low-voltage servo motors are characterized by detailed electrical and mechanical parameters essential for proper selection and installation. The inclusion of brake options affects certain dimensions and specifications, which should be considered during system design.