5-Pole Servo Motor 60mm Series 220V - Technical Specifications

Motor Models and Variants

The document details specifications for 5-pole servo motors in the 60mm series operating at 220V. Two main variants are presented: motors without brake and motors with brake. Specific model codes include 60BST-C00630-2B1 (without brake), 60BST-C00630-2B1-Z (with brake), 60BST-C01330-2B1 (without brake), and 60BST-C01330-2B1-Z (with brake).

Electrical and Mechanical Parameters

• Rated Power: 0.28 W to 0.52 W depending on model.
• Rated Current: Ranges from 1.27 A to 1.6 A.
• Rated Voltage: 220 V for all models.
• Rated Speed: Approximately 3000 rpm ±10% or 3600 rpm ±10%, depending on the model.
• Maximum Speed: Matches rated speed values.
• Line Back EMF Constant: 25 V/Krpm or 31 V/Krpm depending on the motor.
• Moment Coefficient: Between 0.4 Nm/A and 0.49 Nm/A.
• Line Resistance: 0.28 Ω to 0.64 Ω.
• Line Inductance: 5.8 mH to 9.8 mH.
• Electrical Time Constant: Approximately 1.6 ms to 1.69 ms.
• Rated Torque: 0.28 Nm to 0.52 Nm.
• Moment of Inertia: 10^-4 kg·m² scale, values around 74.5 to 98 (units not fully clear).
• Rotor Pole Pairs: 5 poles.
• Motor Insulation Level: Class F.
• Protection Level: IP54.
• Installation Dimensions: Long body length approximately 93 mm to 98 mm.

Additional Notes

The motors are designed for 220V operation with a protection rating of IP54, suitable for environments requiring moderate protection against dust and water. The presence or absence of a brake affects some parameters such as rated current and torque. The motors have a Class F insulation rating, indicating suitability for higher temperature operation.

Connection terminals are indicated as U, V, W for the three phases and PE for protective earth.