LH88
16Pages

{{requestButtons}}

Catalog excerpts

LH88 - 1

LH88 High Intensity Aviation Obstruction Light Products description and application LH88 High-intensity aviation obstruction lights are used to mark buildings that may cause damage to aircraft. Combines with advanced LED, optical and system control technology to meet the most demanding applications. Suitable for obstacles with a height of 150 meters. Suitable for high salinity corrosion area. Features •Aluminum alloy die-cast shell, yellow electrostatic powder coating surface, anti-vibration, corrosion-resistant. • Anti-UV, shock-resistant PC housing; flammability level: UL94V-2. • Waterproof silicone seal structure. • Light source using LED technology, long life, low energy consumption, high efficiency. • Professional EMC design, anti-electromagnetic interference. • Wind load level:>240km/h. • Day and night auto switch, can be controlled by local time or photocell. • Lamp with fault alarm detection and alarm output. • GPS synchronization function (optional). Specifications Standard CAAC MH6012-2015 Aviation Obstruction Light ICAO ICAO Annex 14 Volume I, Sixth Edition Aerodrome Design and Operations FAA Advisory Circular 150/5345-43GH Specification for Obstruction Lighting Equipment Electrical parameters Mechanical parameters Input Voltage AC200~240V/AC100~130V/DC48V optional (power box ) DC48V(Light head) Rated Power Surge Lightning Protection Electrostatic discharge_ With power box, 1 layer 85W (daytime) With power box,2 layers 150W (daytime) With power box,3 layers 220W (daytime) IEC61000-4-5 L- L 6kV IEC61000-4-5 L- G 6kV IEC61000-4-2 Contact discharge 8kV Operating temperature Ambient humidity Storage temperature IP rate Weight Light source LED lifespan Signal Type Flash Rate Horizontal Beam Spread Vertical Beam Spread Intensity

Open the catalog to page 1
LH88 - 2

LH88 High Intensity Aviation Obstruction Light 200,000±25% cd (ICAO-Type A,Our Model:LH88AA) 100,000±25% cd (ICAO-Type B,Our Model:LH88AB) 200,000±25% cd (CAAC-Type A,Our Model:LH88CA) 100,000±25% cd (CAAC-Type B,Our Mode:LH88CB) On/Off level Mounting dimensions Unit:mm Three layers light installation dimensions

Open the catalog to page 2
LH88 - 3

LH88 High Intensity Aviation Obstruction Light Two layers light installation dimensions 472.4 One layer light installation dimensions

Open the catalog to page 3
LH88 - 4

LH88 High Intensity Aviation Obstruction Light Installation method of use • Must be installed by professionals; • Please make sure power-off when operation. • Make sure the capacitor group’s electricity of DC 48V has been released completely before install and maintain the AC power box; • Please make sure the grid voltage and load capacity of power supply meet the requirement. Details please refer to the light’s datasheet.: • Light head with one layer or two layers or three layers have the same installation procedures, this note No.1-No.8 takes three layers as demonstration._ 1.Open the...

Open the catalog to page 4
LH88 - 5

2.Use a wrench to unscrew theno.13-M12 bolt set (bolt, flat pad, spring pad) on the bottom of light’s bracket and no. 14- packaging bracket (4 sets); unscrew the no. 15-M10 bolt set (bolt, flat pad, spring pad, nut) on the bottom of the power box and no. 14-packaging bracket (4 sets).All the bolt sets please reserve for future use. 13 14 14 3.Please install the junction box vertically onto the light bracket, make sure the aviation plug facing outward. 4.Make sure the mounting hole position of the junction box is the same as the light’s bracket; use 4 sets of M10 bolt set unscrewed from...

Open the catalog to page 5
LH88 - 6

LH88 High Intensity Aviation Obstruction Light 7.As shown below, the light head can adjust through X axis from -10° +10° Y axis from -10° +10° to , to . -9° X axis- angle adjustment (-10° +10° to ) Y axis- angle adjustment (-10° +10° to ) 7.1 Detailed angle adjustment procedures: a. Along X axis (as picture shown) to adjust the angle: (1) Loose the bracket fixing screw (no. 19) on both sides of the mounting bracket; (2) Loose the angle fixing screw (no. 17) on both sides of the mounting bracket; (3) Slowly loose the angle adjusting screw (no. 18) on both sides of the mounting bracket; (4)...

Open the catalog to page 6
LH88 - 7

LH88 High Intensity Aviation Obstruction Light 8.Installation of power box (choose according to the product) 8.1 AC power box: Mounting dimension 800mm*420mm. Use 4 sets of M10 bolt set to fix the power box onto the mounting surface. Make sure the minimum open range of the power box is 730mm*600mm*1000mm and the power box can open normally. For convenient wiring, the power box should better be away from the ground at least 200mm. 8.2 DC power box: Mounting dimension 495mm*320mm. Use 4 sets of M10 bolt set to fix the power box onto the mounting surface. Make sure the minimum open range of...

Open the catalog to page 7
LH88 - 8

LH88 High Intensity Aviation Obstruction Light Wiring method of use Light head with one layer or two layers or three layers have the same wiring procedures, this notice takes three layers as demonstration: 1.Wiring diagram AC110/AC220/DC48 OPT DC power supply wire between the power box output and the junction box. Wire specification as below chart: Cable Specification Product classification Core dia≥8mm² Core dia≥6mm² Core dia≥4mm² ICAO-High intensity type A(two layers) Core dia≥8mm² Core dia≥6mm² Core dia≥4mm² ICAO-High intensity type B(one layer) Core dia≥6mm² Core dia≥4mm² Core dia≥4mm²...

Open the catalog to page 8
LH88 - 9

LH88 High Intensity Aviation Obstruction Light 2.Take out the three core aviation plug (big), five core aviation plug (small) and the photocell box. Below wires please equipped by customers according to the construction site; 2.1 Please equipped with a three core sheathed wire (no.20) which is long enough for connection of power box output and junction box. Detailed specifications please refer to the chart in step 1. Then please refer to below picture, tightly connect the wire with the three core aviation plug (big). Notice: After connection, the back nut of the three core aviation plug...

Open the catalog to page 9

All Shanghai Nanhua Electronics Company catalogs and technical brochures

  1. ABC-7A

    1 Pages

  2. ABC-7L

    2 Pages

  3. LS310

    2 Pages

  4. AL110U

    2 Pages

  5. AL80

    2 Pages

  6. ABC-401

    1 Pages

  7. LM100

    4 Pages

  8. LW24XX

    2 Pages

  9. LF30Series

    5 Pages

  10. LF43 Series

    4 Pages

  11. LF23

    3 Pages

  12. LF22

    4 Pages

  13. AL001

    1 Pages

  14. BC-3B

    1 Pages

  15. AL600U

    2 Pages

  16. BC-110

    1 Pages

  17. AL310

    3 Pages

  18. BC-2

    2 Pages

  19. AS210

    3 Pages

  20. AS201A

    2 Pages

  21. LT602U

    2 Pages

  22. LT601U

    2 Pages

  23. LT101

    2 Pages

  24. LQ006U

    1 Pages

  25. BC-60

    1 Pages

  26. DT00

    6 Pages

  27. ZD402

    2 Pages

  28. TW101

    2 Pages

  29. LT864

    5 Pages

  30. LM40

    6 Pages

  31. LM101+LM212

    2 Pages

  32. LM101

    1 Pages

  33. LM403

    4 Pages

  34. LS810D

    2 Pages

  35. LS730U

    1 Pages

  36. LS710

    2 Pages

  37. LS31X-E1-V10

    2 Pages