LH86IL) High Intensity Obstruction LightProducts description and applicaiton LH86(L) High-intensity aviation obstruction lights are used to mark buildings that may cause damage to aircraft. Combines with advanced LED, optical and system control technology to meet the most demanding applications. Suitable for obstacles with a height of 150 meters. Suitable for high salinity corrosion area. Features o Aluminum alloy die-cast shell, yellow electrostatic powder coating surface, anti-vibration, corrosion-resistant, o Anti-UV, shock-resistant PC housing; flammability level: UL94V-2. o Waterproof silicone seal structure, o Light source using LED technology, long life, low energy o consumption, high efficiency, o Professional EMC design, anti-electromagnetic interference, o Wind load level:240km/h. o Day and night auto switch, can be controlled by local time or photocell, o Lamp with fault alarm detection and alarm output, o GPS synchronization function (optional). Standard CAAC MH/T 6012-2015 , AC-137-CA-2017 Aviation Obstruction Light ICAO ICAO Annex 14 Volume I, Eighth Aerodrome Design and Operations Edition FAA Advisory Circular 150/5345-43J Specification for Obstruction Lighting Electrical parameters Mechanical parameters Input Voltage Rated Power Surge Lightning Protection Electrostatic discharge Operating temperature Ambient humidity Storage temperature IP rate Light source LED lifespan Signal Type Flash Rate Horizontal Beam Spread Vertical Beam Spread Intensity

LH86IL) High Intensity Obstruction Light Mounting dimensions Wiring diagram Input power supply Fault alarm output Installation method of use • Please install the light horizontally, and make sure the mounting plane has sufficient strength; the mounting bracket can also be customized according to the specific situation. • When installation, please stay away from the nearby light source, at the same time, ensure the photocell will not be blocked by the near objectsfsuitable for the type with photocell). • Make sure the power supply can match the rated power of the light before connecting. • GPS...

LH86IL) High Intensity Obstruction Light Note: When the input voltage is in 220V[~] : If using 1.5mm2 cable as incoming power cable , The maximum distance from the electrical cabinet to the light is 762m. If using 2.5mm2 cable as incoming power cable , The maximum distance from the electrical cabinet to the light is 762m. Precautions • For high-power lamp , the surface temperature is high, it cannot be covered. And the distance from the object no less than 3m, to avoid burns or fire. • The part of material of products is PC( like lamp cover and lamp shell), so it cannot direct or indirect touch...