Catalogs >
Shanghai Nanhua Electronics Company >
FAR Ultrasonic Wind Sensor

FAR Ultrasonic Wind Sensor
4Pages

Catalog excerpts

FAR Ultrasonic Wind Sensor Products description and application FAR wind speed sensor is a maintenance free ultrasonic sensor. Product has no moving parts and has fast dynamic response, which is suitable for gust measurement. Built-in high efficiency heating device, ensure product normal operation in harsh cold environment. Designed for wind monitoring and wind resource assessment in the fields of engineering machinery, port machinery, factories and mines, wind power, environment protection, high way and railway. Features • Adopt time difference measurement principle, strong capacity of environmental interference resistant • Adopt high efficiency filtering algorithm, special compensation technology design for rain, fog weathers • Various signal output for option • Multistage lightening and surge protection design • Power interface and signal interface full insulation design • Stainless steel body, corrosion resistant and high strength General Specifications Electrical_ discharge IEC61000-4-2 contact discharge 8kV Signal output 4~20mA/0~20mA _RS485_ Meteorological ■2 Wind speed range 0~50m/s Mechanical Material Humidity Operating temperature IP Rate Wiring Color Weight Stainless steel 0%~100%RH Ta-40°C ~ +70°C IEC60529IP66 Aviation socket Metallic 2.5 kg Wind direction range Accuracy wind direction Resolution wind direction speed Anti-wind level >70m/s 1. The heating function is turned off under default state. If you need the heating function, please refer to the communication protocol 1.5.If the heating function is turned on, when the temperature of the transducer cover drops below + 15 ° C, heating will be started; when the temperature of the cover reaches + 25 ° C, Stop heating. 2. This is the default state and can be customized.

Open the catalog to page 1

FAR Ultrasonic Wind SensorMounting dimensions Unit: mm The standard mounting type of FAR ultrasonic wind sensor is tube installation (<p50mm), and have G3/4 male adapter for choice. G3/4 male adapter suit to board mounting (hole dimension is <p27-<p30mm). Installation method: 1.Secure the <p50mm outer diameter tube or secure the G3/4 male adapter. 2. Insert the aviation plug of the cable from the <p50mm tube or G3/4 male adapter and insert into the aviation socket at the bottom of the sensor and lock it. 3. Put the sensor into the top of the installation tube and fix 4 M8 screws. Point to...

Open the catalog to page 2

Modbus protocol (Baud rate: 9600bit/s(factory setting), 8bit data, no parity check, one stop bit.) Factory setting baud rate: 9600bit/s Factory setting wind sensor address: 01H 1 Protocol description (default address: 01H) 1.1 Query wind speed data (coil address:122-123) 1.1.2 Byte definition Command character The first byte 01H is the device address The second byte 03H is the function code The 3rd and 4th bytes 00H and 7AH are the coil start addresses The 5th and 6th bytes 00H and 01H are the number of coils The 7th and 8th bytes 60H and F0H are the upper and lower bits of the first 6...

Open the catalog to page 3

FAR Ultrasonic Wind Sensor Automatically send wind speed/wind direction command (Baud rate: 9600bit/s(factory setting), 8bit data, no parity check, one stop bit) 1. Data definition: auto-output a frame per 1s, total 7 bytes. Annex Installation diagram Product name Safety wire 1 .Tighten the M8 eyebolts 2.The installation of safety wire as the picture shown 1 .Apply thread fastening agent to the anti-bird tip thread; 2.Screw the anti-bird tip into the upper threaded hole of the ultrasonic Thanks for choosing our products, NANHUA Electronics is the professional brand of signal transmission...

Open the catalog to page 4

FAR Ultrasonic Wind Sensor 4Pages

Catalog excerpts

All Shanghai Nanhua Electronics Company catalogs and technical brochures

FAR Ultrasonic Wind Sensor
4Pages