AS201A
2Pages

Catalog excerpts

AS201A Crane Loudspeaker & Controller Kit AS201A-E1-V11 AS201A Applications Specially design for cabs of hoisting machinery (tyre crane, crawler crane,overhead traveling cranes, etc.), harbors machinery(gantry cranes, bridge crane, etc). Major functions and features • Speaking prior to alarm. • Volume adjustable. • Microphone & Loudspeaker available. • Various tones to choose from. • Visible and audible alarm synchronous (optional). • Several kinds of combination mode for choose. • Nice appearance, convenient operation. Specifications Operating voltage • Use M5 or M6 screws to fasten to the mounting surface, the mounting surface should level-off and have enough mechanical strength. • Ensure the input power is in line with the operating voltage of the controller box and take care of polarity. Connect to the marked accessories as per the wiring diagram. • Connect the power, red light working, press 'ON / OFF' button on control panel , the light off, while the control box into standby mode, press the control box it will be into work mode. • Audio-visual alarm separately,Push the “alarm indicator" switch, the yellow indicator lighting or the alarm light terminal with DC24+/DC12V+ output at the same time. Push again will be off, take care of the positive and negative polarity. Audio-visual alarm synchronously, there will be no any effect pushing the “alarm indicator". • Audio-visual alarm separately: The alarm system works pushing the “alarm" button. The horn sends out the alarming voice. The system stops pushing the button again. Audio-visual alarm synchronously: alarm system and warning light works at the same time by pushing the “alarm" button. Both of them stop pressing the button again. • Tone selection :push the tone button, the Av Bv E tone will alarm circularly , please choose the tone you want. • Volume adjust, through the a and v of Volume to turn up and turn down the volume, if under the alarm condition, push the a and v of Volume to turn up and turn down the alarm volume; Push the microphone switch can be speaking, and constant push can adjust the volume of speaker. • If the system adopts wire connection mode, connect the accessories based on the marked color cable and connect to the control system perfectly. Panel function introduction Shanghai Nanhua Electronics Co., Ltd Tel :86021-39126868 Fax :8602i-39i26868ext 808/818 Web www.nanhua.com E-mail saies@nanhua.com Add: Building 9, No. 1755Wenbei Rd, Jiading district Shanghai 201802 All rights reserved by Nanhua, without the written authorization of the Nanhua, any part thereof shall not be reproduced or transmitted in any form.

Open the catalog to page 1

AS201A Crane Loudspeaker & Controller Kit SE-A uses Φ3.5 standard plug, AS201A Wiring diagram (Tone A+ one B+ Tone E) matching,AS201A/AE205 control box rear panel; SE-B standard crystal plug is connected Notice • This product control box is only suitable for interior installed. • Correct wiring, do not short circuit. • Check Power and alarm rated voltage in accordance. External connection cable and power cable • Speaker power should be standard. • Control box warming is normal when working. • Do not open the chassis. • Please read this manual before using this product. • Any...

Open the catalog to page 2

AS201A 2Pages

Catalog excerpts

All Shanghai Nanhua Electronics Company catalogs and technical brochures

AS201A
2Pages