Catalogs >
Shanghai LEEG Instruments Co.,Ltd. >
SP26 Pressure sensor

SP26 Pressure sensor
10Pages

Catalog excerpts

SENSING TOMORROW Product introduction Monosilicon pressure sensor The SP26 Monosilicon pressure sensor uses a highly stable silicon chip packaged in a 316L stainless steel substrate, the applied pressure is transmitted to the silicon chip through the stainless steel diaphragm and the internally sealed silicone oil, the silicon chip does not directly contact the measured medium. It’s an isolated structure, suitable for thousands of liquid media. It meets the requirements of explosion-proof, and the side exhaust of the gauge pressure product meets the needs of high-precision measurement. Features High stability mono-silicon sensor die Voltage excitation Isolated explosion-proof structure, suitable for various media All stainless steel material and welded Hastelloy C, SS316L diaphragm material Built in temperature sensitive element Industrial process control, gas, liquid pressure measurement, liquid level measurement, pressure detection instruments, hydraulic systems and switches, refrigeration equipment and air conditioning systems, aviation and navigation testing, petroleum, chemical, electric power. Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 1

SENSING TOMORROW Measuring range and limit Nominal value Lower range limit (LRL) Lower limit typical mV value mV-LRL Upper limit typical mV value mV-URL Upper range limit Overload limit (URL) Temperature diode output mV value Temperature Electrical performance Power supply: 2.5-12VDC Electrical connection : 110mm silicone rubber soft wire Common mode voltage output: 50% of input (typical) Bridge resistance: 6kΩ±0.5kΩ Response time (10%-90%) : <2ms Insulation resistance: >100MΩ@500VDC Insulation strength: <5mA/500VAC Disclaimer: all the data used in the product description is not legally...

Open the catalog to page 2

SENSING TOMORROW Technical Specification Working temperature Storage temperature Full point output voltage Refer to measuring range and limit Zero temperature effect Temperature hysteresis Pressure hysteresis Long term drift Non-linearity error Diaphragm material Housing connection Electrical connections Voltage excitation Kovar pins Grounding column Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 3

SENSING TOMORROW Electrical connection Socket opening size of PCB for wiring (6 PIN) Dimension drawing of PCB socket Left view Main view Vertical view Wiring plug dimension (6 PIN) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 4

SENSING TOMORROW Electrical connection Application example Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 5

SENSING TOMORROW Housing connection (0) drawing and dimension (mm) Housing connection (2) drawing and dimension (mm) Housing connection (4) d rawing and dimension (mm) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 6

SENSING TOMORROW Housing connection (K) drawing and dimension (mm) Housing connection (8) drawing and dimension (mm) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 7

SENSING TOMORROW Process connection (G03) (unit: mm) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 8

SENSING TOMORROW Selection Table Detailes specifications as following * Fast delivery available Monosilicon pressure sensor Range code Diaphragm material Isolated filling fluid Silicone oil filling, temperature limit: -45-205℃ Inert oil, temperature limit: -20-160℃ Constant voltage excitation, built-in diode Stainless steel welding Electrical connection 110mm Silicone rubber flexible wire (six core wire) Housing connection Sensor signal output Process connection Output type Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be...

Open the catalog to page 9

SENSING TOMORROW SENSING TOMORROW Shanghai LEEG Instruments Co.,Ltd scan & follow LEEG wechat check website for more info ADD: No.99 Duhui Road, Minhang District, Shanghai China Postcode: 201109 Tel: (86) 21-31261976 Fax: (86) 21-31261975 E-mail: sales@leegsensor.com info@leegsensor.com Web: www.leegsensor.com Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2023.08.V1.0

Open the catalog to page 10