SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area

Product catalog summary

Product Introduction: The SMP858-TSF-H is a piezoresistive single crystal silicon gauge pressure transmitter tailored for the food and pharmaceutical sectors. It supports CIP/SIP cleaning and sterilization, featuring a compact design with a stainless steel 316L welded process diaphragm. The transmitter is filled with FDA-certified hygienic fluid and offers various international standard process connections.

Main Parameters: This transmitter measures gauge pressure ranging from 10kPa to 10MPa, with output signals of 4-20mA or 4-20mA+HART. It boasts a reference accuracy of ±0.2% URL or ±0.5% URL, suitable for fluids compatible with its wetted parts, and applicable for pressure and level measurements.

Technical Specifications: The device's accuracy encompasses linearity, hysteresis, and repeatability, calibrated at 20℃±5℃. It supports a nominal range from 40kPa to 10MPa, with overpressure limits up to 25MPa. Compliance with GB/T28474/IEC60770 standards is ensured, featuring a zero-based calibration span, linear output, and silicone oil filling.

Performance Specifications: The transmitter maintains a typical accuracy of ±0.2% URL and stability of ±0.2% URL per year. It operates within a temperature range of -40 to 85℃, with an LCD display range of -20 to 70℃. The device is IP67 rated and suitable for hazardous conditions (ExiaIICT4).

Power and Load Requirements: Operating on a power supply range of 10.5-55VDC, with HART protocol requiring 16.5-55VDC, it supports a load resistance of 0-2119Ω and a transmission distance of less than 1000m.

EMC Environment: The device adheres to various EMC standards, including radiated and conducted interference, electrostatic discharge immunity, and surge immunity, ensuring reliable performance across different environments.

Menu Functions: The transmitter offers fixed output, damping time adjustments, and various display modes. It supports analog output types and alarm signals, with both local and remote control options available.

Product Selection and Ordering Information: Detailed instructions are provided for selecting the appropriate model, electrical connection, output signal, display options, process connection, and additional accessories. Fast delivery options are available for certain configurations.

Product Overview: The SMP858-TSF-H is designed for precise pressure measurement, equipped with factory settings including analog output type, display mode, and alarm signal, all set to default values unless specified otherwise in the order.

Factory Settings and Parameters: Factory settings include a tag position set to none, an analog output type set to mA LINER, and a display mode set to DISP P. The alarm signal is set to 'No', and the damping value is set to 0. The 4mA lower range value (LRV) and the 20mA upper range value (URV) are determined according to order specifications, as is the process unit.

Approvals and Certifications: The product holds a CE certificate issued by Intertek, with a quality management system certified under ISO9001-2008. It complies with standards EN61000-6-2:2005 and EN61000-6-4:2007, with a registered number AC/0100708.

Company Information: Shanghai LEEG Instruments Co., Ltd is located at No.100 Duhui Road, Minhang District, Shanghai, China. Contact via phone at (86) 21-31261976, fax at (86) 21-31261975, or email at [email protected] and [email protected]. More information is available on their website www.leeg.cn.

Disclaimer: The data provided in the product description is not legally binding and may be subject to change for further improvements.

Catalog excerpts

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-1

SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter SENSING TOMORROW Product introduction Sanitary pressure transmitter Sanitary pressure transmitter, designed for food and pharmaceutical industry, is suitable for CIP/SIP cleaning and sterilization.Smart compact design, the welded process diaphragm medium parts is made of high quality stainless steel 316L, roughness≤0.4um, filling fluid with hygiene standard in line with FDA certification, variety of international standard process connections are available. Vertical installation Horizontal installation Main parameters Pressure types Gauge pressure Measuring range 10kPa-10MPa, please refer to the ordering information chapter Output signal Pressure, level Measuring medium The fluids which compatible with wetted parts Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2016.08.V1.0

Open the catalog to page 1

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-2

SENSING TOMORROW SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter Technical specifications Measuring range and limit Nominal value Smallest calibratable span Lower range limit（LRL） Upper range limit （URL） Overpressure limit * The unit of the measuring range above can be converted into kg/cm²、 MPa and kPa. Provide other measuring range according to requirements. Adjust requirements: lower range value (LRV) and upper range value (URV) can be adjusted within the scope of the upper and lower range limit, minimum measuring range≤| URV - LRV |≤maximum measuring range. 　　　...

Open the catalog to page 2

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-3

SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter SENSING TOMORROW Technical Specifications Power supply Operating conditions HART protocol Load resistance 0-2119 Ω for working condition, 250-600Ω for HART protocol Damping time Total damping time constant: equal to the sum of damping time of amplifer and sensor capsule Damping time of amplifer : 0-100S adjustable Power consumption Diaphragm capsule (isolation sensor diaphragm and silicon oil filling) damping time: ≤0.2S Startup after power off : ≤6S Power supply and load requirements Normal services after data recovery：≤31S...

Open the catalog to page 3

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-4

SENSING TOMORROW SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter Technical Specifications EMC environment(not RS485 signal output) Basic standards Test conditions Performance level Radiated interference Conducted interference (DC power port) Electrostatic discharge immunity test (ESD) GB/T 17626.2/IEC61000-4-2 4kV(Contact ),8kV(Air) Immunity to radio frequency EM-fields Power frequency magnetic field Immunity test Electrical fast transient / Burst Immunity Test Surge immunity requirements Immunity to conducted disturbances induced by radio frequency fields (Note...

Open the catalog to page 4

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-5

SENSING TOMORROW SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter Menu function Specific menu Transmission module type Upper range value, 20mA Lower range value, 20mA Output signal Local control LCD/3 buttons on body HART Remote control Damping time Setting range Display mode Analog output type Process variable shows on main screen, percentage and progress bar shows on secondary screen Output type Square root Current shows on main screen, percentage and progress bar shows on secondary screen Percentage shows on main screen, percentage and progress bar shows on secondary...

Open the catalog to page 5

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-6

SENSING TOMORROW SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter Product selection instruction Sensor select instruction Code Nominal value Electrical connection Code Item F1 Range -40kPa-40kPa, smallest calibratable span 10kPa Range -100kPa-250kPa, smallest calibratable span 25kPa Range -0.1MPa-1MPa, smallest calibratable span 100kPa Range -0.1MPa-3MPa, smallest calibratable span 300kPa Electrical Stainless steel termimal, aviation plug connection M12*1 (4 pin) (H2), IP67,vertical mounting Range -0.1Pa-10MPa, smallest calibratable span 1MPa Stainless steel termimal,...

Open the catalog to page 6

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-7

SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter SENSING TOMORROW Product selection instruction Electrical connetion accessories Aviation plug straighter(J1) Display module（C） Label 1/Brown Brown Black Blue White Brown Black Blue White Process connection select instruction Connection type Standard connection, medium temperature: -25-85℃ Process connector material Isolation fluid Sanitary fluid filling, Neobee M-20, filling process temperature: -10-180℃ Code Items Silicon oil filling, process temperature: -45-205℃ Isolation diaphragm material Stainless steel, SUS316L...

Open the catalog to page 7

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-8

SENSING TOMORROW SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter Product drawing and dimension Standard drawing and dimension with display( C ) / without display (A ) vertical installation(F1) ( unit:mm) Standard drawing and dimension with display(C) / without display (A ) horizontal installation(F2) ( unit:mm) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2016.08.V1.0

Open the catalog to page 8

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-9

SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter SENSING TOMORROW Product drawing and dimension Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2016.08.V1.0

Open the catalog to page 9

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-10

Open the catalog to page 10

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-11

SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter Ordering information chapter Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve

Open the catalog to page 11

SMP858-TSF-H Stainless steel diaphragm pressure sensor for hygiene area-12

SMP858-TSF-H Piezoresistive single crystal silicon gauge pressure transmitter SENSING TOMORROW Ordering information chapter Air female plug (straighter) without cable, 4 pin, M12*1, IP67 Air female plug (elbow) without cable, 4 pin, M12*1, IP67 Welding adaptor, M20*1.5 (Female), SUS316 Welding adaptor, G1/2 (Female), SUS316 Welding adaptor, G1 (Female), SUS316 Welding accessory Welding adaptor, Tri-clamp 2" clamp Calibration report Calibration report provided by our company Approvals (multiple) Intrinsic safety certificate, ExiaIICT4, NEPSI Process connection accessory Factory settings and parameters...

Open the catalog to page 12