CSA Certificate for Pressure transmitters -LEEG Instruments

Product catalog summary

Certificate of Compliance Overview
This document certifies that the products manufactured by Shanghai LEEG Instruments Co., Ltd., specifically the DMP305X and SMP858 series pressure transmitters, are eligible to bear the CSA Mark for Canada and the US. The certification covers compliance with both Canadian and US standards for hazardous locations.

Product Specifications
The certified products are classified under:

Class I, Division 1, Group A, B, C, and D T6
Class II, Division 1 Group E, F, and G T80ºC
Class III

They operate at a voltage range of 10.5 to 55Vdc with output signals of 4 to 20mA, 1 to 5Vdc, HART, etc. The ambient temperature range is -40ºC to 60ºC, with a maximum process temperature of 80°C and an IP66 rating.

Applicable Standards
The products comply with several standards, including:

CAN/CSA-C22.2 No. 61010-1-12
CSA C22.2 No. 25-17
CSA C22.2 No. 30-M1986
CSA C22.2 No. 213-17
UL Std. No. 61010-1 (3rd Edition)
FM 3600:2018, FM 3611:2018, FM 3615:2018, FM 3616:2011

Conditions of Acceptability
1. Temperature codes depend on process temperature.
2. Branch and entry point temperatures may exceed 60°C if the process temperature is over 80°C.
3. Wiring must be suitable for Class I, Division 1 Hazardous Locations.
4. Equipment must be powered by a limited energy electric circuit.

Markings
Products must be marked with:

Company name or trademark
Model number
Date code or serial number
Hazardous Locations Designation
Temperature code rating
Ambient temperature range
Complete electrical rating
Maximum Working Pressure (MWP)
Warnings in both English and French

Additional bilingual markings may be required by local authorities.

Product Certification History
The original certification for the DMP305X and SMP858 series pressure transmitters was issued on 2020-06-15.

Catalog excerpts

CSA Certificate for Pressure transmitters -LEEG Instruments-1

Certificate of Compliance Certificate: 80020805 Master Contract: 300754 Project: 80020805 Date Issued: 2020-06-15 Issued to: Shanghai LEEG Instruments Co., Ltd. No.99 Duhui Road, Minhang District, Shanghai, China Attention: Feiguo Leng PRODUCTS CLASS 2258 02 - PROCESS CONTROL EQUIPMENT-For Hazardous Locations CLASS 2258 82 - PROCESS CONTROL EQUIPMENT-For Hazardous Locations - Certified to US Standards Class I, Division 1, Group A, B, C and D T6 Class II, Division 1 Group E, F and G T80oC Class III DMP305X and SMP858 series pressure transmitter ,Operating voltage 10.5 to 55Vdc ,Output signal 4 to 20mA ,1 to 5Vdc, HART etc., -40°C < Ta < 60°C, Maximum process temperature 80°C, IP66. Note: Refer to the Description section of this report for a complete model number designation for the DMP305X and SMP858 series Pressure transmitter. APPLICABLE REQUIREMENTS CAN/CSA- C22.2 No. 61010-1-12 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements CSA C22.2 No. 25-17 Enclosures for use in Class II, Division 1, Groups E, F, and G hazardous locations DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 1

Open the catalog to page 1

CSA Certificate for Pressure transmitters -LEEG Instruments-2

Certificate: 80020805 Master Contract: 300754 Project: 80020805 Date Issued: 2020-06-15 Explosion-proof enclosures for use in class I hazardous locations Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements Approval Standard for Electrical Equipment for Use in Hazardous (Classified) Locations - General Requirements Approval Standard for Nonincendive Electrical Equipment for Use in Class I and...

Open the catalog to page 2

CSA Certificate for Pressure transmitters -LEEG Instruments-3

Certificate: Project: Master Contract: 300754 Date Issued: 2020-06-15 Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having Jurisdiction. It is the responsibility of the manufacturer to provide and apply these additional markings, where applicable, in accordance with the requirements of those authorities. The products listed are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US (indicating that products have been manufactured to the requirements of both Canadian and U.S. Standards) or with adjacent...

Open the catalog to page 3

CSA Certificate for Pressure transmitters -LEEG Instruments-4

Supplement to Certificate of Compliance Certificate: 80020805 Master Contract: 300754 The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Product Certification History Date Description 2020-06-15 Original Certification for DMP305X and SMP858 series pressure transmitter DQD 507 Rev. 2019-04-30 © 2018 CSA Group. All rights reserved. Page 1

Open the catalog to page 4