Machine Tool Industry Machine Tool Industry 简要说明 / Brief Introduction 简要说明 / Brief Introduction 该设备采用变频电机拖动皮带驱动主轴运转。可实现多段速自动跑 合，每段可自定义转速、时间，跑合过程中监控各传感器温度，实 时显示并生成曲线，监测整个跑合过程中的温度变化。温度过高或 者传感器断线时可报警，并自动降低转速或停机。 采用剑平电测系统，测量方式多样化，动、静平衡，支承方式多达 10 种，加去重、正反转可灵活定制。采用多重定 标系数组合，自动调整系统灵敏度，换挡无跳跃，软硬件双重滤波，数据压缩，测量稳定。 This machine is mainly used for dynamic unbalance detection of machine tool spindle. Adopt Jianping electronic measuring system, the measuring method is diversified, dynamic and static balancing, up to 10 kinds of bearing modes, adding and removing weight, CW and CCW rotation can be customized flexibly. Adopt multiple calibration coefficient combinations, automatically adjust the system sensitivity, shift gear without skip, double filtering of software and hardware, data compression, and stable measurement. 技术参数 / Technical Parameters 规格 Specification 工件质量范围 （kg） Maximum weight of workpiece 工件最大外径 （mm） Maximum diameter of workpiece 两支承座间间距 （mm） The distance between two bearing pedestals 支承轴径范围 （mm） Journal diameter on roller carriages 圈带传动轴径范围 （mm） Belt driving diameter The spindle running-in table is used for spindle running-in and status monitoring during the running-in process. The equipment adopts a frequency conversion motor to drive the spindle customize the speed and time of each segment, monitor the temperature